Has anyone out there used the Nosler ballistic tip in their 9.3x62. If so, could you help me out with some load data? I have a CZ 550 Lux, and will be using Lapua brass.

Any data is appreciated.

[ 08-18-2003, 04:30: Message edited by: Trailblazer ]

My load is 60 gr. of IMR 4320. This pushes the 250 Ballistic Tip at 2530 fps.

Vithavuory OY N135 56grs

59gr. Reloader 15, WLR primer, Lapua brass, 2580 fps, with 250gr Nos,BT

[ 08-24-2003, 01:50: Message edited by: willow ]

For CZ 550 Lux-250 Nosler BT with 55.0 grains of IMR 3031 and CCI 200 primers in Norma brass (warning-this load is above the listed max of 53.5 grains in the Nosler manual). This load is extremely accurate in my CZ, but start at about 50 grains and work up. My CZ has a very long throat, which contributes to allowing more powder to be burned without pressure signs, and I seat the bullets to full magazine length which effectively increases case capacity.

Jim

250-grain Ballistic Tip load in my CZ550 is 58.0 grains Reloader 15; Norma brass, WLR primers with bullet seated to 3.350" OAL. Measured velocity of 2,514 fps with chrono 7 feet from muzzle. Very accurate load.