The Accurate Reloading Forums
Which Powders?
17 January 2006, 00:41
Jason DossWhich Powders?
These are the guns I have:
1- 308
2- 300 SAUM
3- 243
4- 25-06
5- 7mmRM
6- 223
7- 30-30
With the above calibers in mind, what 3 powders would be a must have. I have IMR 4895 as a must have for the 308. I am noticing that a lot of people use VARGET. It seems like that should be on the list. What do you guys say?
These are the other powders that I have, but haven't really used much of.
AANo.2- used to load some 44mag with it.
AA1680
AA2230
AA2700
./l ,[___],
l--L=OlllllO=
O_) O_)~-)_)
If at first you don't succeed,,,failure may be your thing!!!
17 January 2006, 00:51
arty155mmFor your .223 I would go with H335
17 January 2006, 01:07
MajorCaliberW748 for the .223 and .308 and 30-30, RL22 will work on the rest
17 January 2006, 01:21
the jiggerthe only two i shoot are 308 and 25/06.
308 Varget & RL15
25/06 IMR 4831 & RL19
IF YOU'RE GONNA GET OLD,YOU BETTER BE TOUGH!! GETTIN' OLD AIN'T FOR SISSIES!!
17 January 2006, 02:52
smedleyJason,
The question you put forth is somewhat baited. The choice to make would depend on bullet weight.
IMO: H4831 would be an excellent one to have on the shelf. And I am thinking IMR3031 and IMR4350 would be a couple others to give a try.
The powders that others have posted are good calls also.
Smedley
______________________
Smedley
______________________
From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.'
B.H.Obullshitter
------------------------------------
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"
Winston Churchill
------------------------------------
"..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams
------------------------------------
Facts are immaterial to liberals. Twisted perceptions however are invaluable.
------------------------------------
We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please.
17 January 2006, 03:01
DwightH4350 works very good in my 300SAUM.
17 January 2006, 03:15
fredj338Drop the 4895 & go a bit slower:
IMR4064 or RL15 or W748
H4350 or RL19 or IMR4831
IMR7828 or RL22
This would cover everything you are loading for, provided you are willing to compromise a bit on accuracy vs vel.
LIFE IS NOT A SPECTATOR'S SPORT!
17 January 2006, 03:16
303781- 308 Varget - IMR4064
2- 300 SAUM IMR-4350
3- 243 IMR 4064 or 4350
4- 25-06 IMR-4350
5- 7mmRM H-4831
6- 223 Benchmark or VV-133
7- 30-30 Benchmark
Just my suggestions!!
17 January 2006, 04:58
PumpkinheaverH-4350
Varget
Walk softly and carry a big bore!
17 January 2006, 05:42
Jay Johnson.223 50 Gr. and down Benchmark
55 Gr. and up Varget
243 70 Gr. and down Varget
80 Gr. and up IMR4350
308 Varget
25-06 H4831
7MM RUM RETUMBO
30-30 H4895
300 SAUM H414