THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
.300 Weatherby with 150gr. BT's
 Login/Join
 
One of Us
posted
I loaded some 150 grain ballistic tips today with 88 grains of 7828SSC and they chronographed at 3520-3545. The manual says they should be at around 3400. Is this unusually high for this load? I'm doing this with a 24" barrel on a 700 classic. My sons 270WSM was right on with his speed from a previous measurement so the numbers are right.Just looking for some insight on this. Thanks for the replies.PaLuke
 
Posts: 71 | Location: Hegins,PA | Registered: 28 June 2006Reply With Quote
One of Us
posted Hide Post
I would think you are hard pressed to get 3500+ out of a 24". 88gr is a pretty warm load. Be careful. If you are getting 3400 to 3500 out of a 150 Nosler BT, you wil have VERY explosive results on game within 200 yds.


Free men should not be subjected to permits, paperwork and taxation in order to carry any firearm. NRA Benefactor
 
Posts: 1652 | Location: Deer Park, Texas | Registered: 08 June 2005Reply With Quote
One of Us
posted Hide Post
I was thinking the same thing and then got my sons 270 WSM to check the chronograph. I loaded 85 grs. of 7828 with a 175 gr. Berger and got 3142 which I thought was pretty close to what it should be but was really suprised with the 150 BT's. I'll try it again tomorrow and see if I get the same reading.Thank you for the reply....PaLuke
 
Posts: 71 | Location: Hegins,PA | Registered: 28 June 2006Reply With Quote
One of Us
posted Hide Post
A 175 gr. Berger shot from a 270 WSM - huh??? Did you mean a different bullet weight than 175 gr. or a different caliber rifle?
 
Posts: 212 | Location: Longmont, CO | Registered: 30 July 2005Reply With Quote
One of Us
posted Hide Post
Sorry about that. I meant the 175 Bergers out of my .300 weatherby. My son uses 130 gr. BT's in his 270 Short Mag and gets 3150. I used his previous readings to check the chronograph along with mine with the 175's.Thanks for the replies...PaLuke
 
Posts: 71 | Location: Hegins,PA | Registered: 28 June 2006Reply With Quote
one of us
posted Hide Post
I've got a couple of 300 wby's and can only add that the 150 load seems pretty hot. If the gun has no freebore and the brass is rem and not wby I can see this happening. BUT, the 180 grain load seems "right". It will be interesting to see if there is a "dup" to the 150 situation. I've run 89 I7828 under the same bullet in a fairly fast 26" barrel with wby brass and only got 3450.
 
Posts: 2002 | Location: central wi | Registered: 13 September 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia