The Accurate Reloading Forums
7mm-08 primed brass

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/3411049351

14 April 2011, 20:37
mailmanmark
7mm-08 primed brass
I have a bunch of primed 7mm-08 brass. If these same brass chamber in a .308, can i resize the necks and load them for the .308 ??? Just wondering...


Warning: Trespassers will be shot.......survivors will be shot again...........
14 April 2011, 21:47
wasbeeman
Yes. Depending on how many you have, I think I'd remove or pop the primers before doing it however. The lubes you would have to use might contaminate the primers.
You could try taking the decapping pin out of your die and using mica as your lube. I don't know if that would work or not.


Aim for the exit hole