The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Die Selection for 300 Win MagGo | New | Find | Notify | Tools | Reply | |
| Die Selection for 300 Win Mag | Login/Join |
| new member |
So I've been considering changing out my RCBS dies to improve run out / concentricity and have narrowed my selection down to the following: 1. LEE Collet Die for neck sizing 2. Redding Body Die to FL resize when needed except for neck and use the Lee to set the neck 3. Redding Competition Bullet Seater Interested in what you all think of this selection. | ||
|
One of Us |
Perfect   ____________________________________ There are those who would misteach us that to stick in a rut is consistency - and a virtue, and that to climb out of the rut is inconsistency - and a vice. - Mark Twain | Chinese Proverb: When someone shares something of value with you and you benefit from it, you have a moral obligation to share it with others. ___________________________________ | |||
|
One of Us |
Redding, Lee or RCBS body die; just fine. Redding competition seating die; very good. Lee Collet Die; maybe not so fine. I have a 300 Win. Mag. in which I've tried various methods of sizing and then compared accuracy results. Accuracy was about the same with with full length sized cases and with cases sized with a traditional neck sizing die (Redding) and inferior in those sized with a Lee Collet Die. The same thing happened in loading a 7mm/08. I have used them for necking sizing other cartridges though with acceptable results. | |||
|
| One of Us |
Excellant selection. | |||
|
| new member |
Well I ordered them. If the Lee Collet doesn't work, well I guess I'm only out $20. Thanks. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Die Selection for 300 Win Mag
Visit our on-line store for AR Memorabilia