Anyone have any loads for a 7rum? 140gr comb tech,98 grains RL25.@3700fps Rem 700BDL lefthand 26"

Caution that is max load!!

You're way over your head with that load...

RL-25 From 84.5 grains to 93.5 grains
Federal 215 Primer

thanks Ricci but shows no pressure and shoots 3shots half inch groups!!! And accurate enough to hit Crows at 350 plus!! And Brass resizes great!!!
Would do better but recoil get to me!!

I hate to nit-pick, but one of my pet peeves is when someone defends a load by saying it "shows no pressure."

And, I am not saying your load is not safe (although it seems rather stout to me). But back on track:

Without PRESSURE, the bullet would still be in the case. (I realize what you meant to say what that your load did not exhibit EXCESSIVE pressure.)

Another pet peeve is when police department "spokespersons" give info to the press such as : "small caliber automatic" or ".38 caliber revolver." And it's yet another pet peeve when the writers/reporters aren't sharp enough to ask a question and right the wrong. (The latter is especially irritating to me because I worked in the journalism world for 15 years.)

I worked up a 7mm RUM,150 gr Scirocco load to what I'm reasonably certain now, was overpressure(3600fps) and it showed no excessive pressure signs,re primers,sticky bolt,extraction marks,excessive CHE,nada.Have heard since others have noticed the phenom, seen(or not seen) the same thing.The problem lies with accumulated strain on receiver,etc,not the fact that it did'nt blow up this time.Be carefull out there.
Jeff

If the receiver was stressing woudn't it show on the case?

#1 RICCI, who made Steve God?#2 Bob Who said any thing about journalism? I was not asking your opinion on my load! I was asking for loads of this caliber! Maybe even in other weight of bullets!!!