THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Small 30 Calibers in the Contender
 Login/Join
 
new member
posted
Hello:
I was wondering if anyone out there has working knowledge of the 30/223 in the T/C Contender, and also of the 357 Maximum necked down to 30 Caliber. I belive some have made this last one and called it the 30 Max. The original 30/223 came from Tom Beall in early IHSMA days.

I have both these made up on my desk, and they look like perfect candidates for future barrels. I have plenty of 30 calibers, but most are the heavy hitters I hunt and shoot regular. Would appreciate any/all info/input etc. Just looking at them both really have me fired up. Thanks for listening and hope to hear from you.

Bob
 
Posts: 31 | Location: SW Louisiana | Registered: 01 June 2003Reply With Quote
one of us
Picture of TCLouis
posted Hide Post
I'm like you, I have thoughts that the 30X357 Max (30 Max) would make a great TC chambering.
I ended up with the 30 Max dies from Jim Rock some years ago on another project and thought I would hold them until a stumbled across a 32-20 barrel.
LouisB
 
Posts: 4267 | Location: TN USA | Registered: 17 March 2002Reply With Quote
one of us
Picture of Nashcat
posted Hide Post
Casper,
Ask these questions a little further down, in the Single Shot Pistol forum. You'll be amazed at the number of replies that you get.

Nashcat
 
Posts: 331 | Location: MiddleTennessee | Registered: 26 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia