one of us
| IMR 7828
Red comyn of Altyre
|
| Posts: 95 | Location: interior BC | Registered: 07 April 2004 |
IP
|
|
one of us
| So what's all the buzz with this IMR 7828 stuff? I'm building a 300WSM long-range piece and am casting about for the best powder-- clue me in, please. |
| Posts: 2758 | Location: Fernley, NV-- the center of the shootin', four-wheelin', ATVin' and dirt-bikin' universe | Registered: 28 May 2003 |
IP
|
|
one of us
| quote: Originally posted by rootbeer: So what's all the buzz with this IMR 7828 stuff? I'm building a 300WSM long-range piece and am casting about for the best powder-- clue me in, please.
RL-22 |
| Posts: 2362 | Location: KENAI, ALASKA | Registered: 10 November 2001 |
IP
|
|
one of us
| H1000 works for me but I only shoot 200 grain bullets in my 300 Win mag.
Leftists are intellectually vacant, but there is no greater pleasure than tormenting the irrational.
|
| |
one of us
| I like Winchester's WMR. With a 200 gr. bullet (Speer Hot-core) I get 2950 FPS and .75" groups from a Winchester M70 Wallyworld special. (Looks like a Black Shadow, but no floorplate.) My big bitch is Winchester in their illustrious wisdom dropped the powder. A pox on them. Paul B. |
| Posts: 2814 | Location: Tucson AZ USA | Registered: 11 May 2001 |
IP
|
|
One of Us
| With current technology, Reloader 25 or MRP-2 are the best available powders, but Retumbo looks very promising. |
| |
one of us
| My esteemed gunsmith recommends Hodgdon Short Cut H4831 in the 300WSM. He knows guns... |
| Posts: 2758 | Location: Fernley, NV-- the center of the shootin', four-wheelin', ATVin' and dirt-bikin' universe | Registered: 28 May 2003 |
IP
|
|
one of us
| I have shot three different .300 Winny's and have 7 Elk hunting buddies who shoot it. We have tried every powder under the sun, including all the above. RL-22 cannot be beat for speed and accuracy in our neck of the woods in Ky and Colorado. Good shooting.
phurley
|
| |
new member
| For a excellent 300 Winchester hunting load use a good 180 bullet, take your pick and Reloader 22. quote: If you were limited to one powder for all bullet weights in the .300 Win Mag
The 300 win mag can get finicky once bullet weight drops below 165 grain from my experience on only two 300 win mags. |
| |
One of Us
| RL19 with a 165 grn Sicrocco |
| |
One of Us
| IMR4895 works for 150 gr IMR4895 or IMR4350 work for 180 gr |
| Posts: 9043 | Location: on the rock | Registered: 16 July 2005 |
IP
|
|