THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
425WR case rebate depth
 Login/Join
 
ozhunter
One of Us
Picture of ozhunter
posted
Any one have the dimension of the depth of the extractor rebate on a 425WR case?
I have some discrepancy's in this measurement with my Bertram and Hornerber cases.
Regards,
Adam
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
capoward
One of Us
Picture of capoward
posted Hide Post
quote:
Originally posted by ozhunter:
Any one have the dimension of the depth of the extractor rebate on a 425WR case?
I have some discrepancy's in this measurement with my Bertram and Hornerber cases.
Regards,
Adam
Not sure about Bertram's brass but Horneber’s website indicates that they manufacture all cases to CIP and SAAMI specifications so I'd think that their brass should be correct for rim and groove diameter, width, and depth.


Jim coffee
"Life's hard; it's harder if you're stupid"
John Wayne
 
Posts: 4954 | Location: Central Texas | Registered: 15 September 2007Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
Thanks capoward,
I can find Bertrams sight but not Hornerbers.
Kynamco web sight has no dimensions.
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
ozhunter
One of Us
Picture of ozhunter
posted Hide Post
Any books or Wsights with this info that you know of?
 
Posts: 5886 | Location: Sydney,Australia  | Registered: 03 July 2005Reply With Quote
AllenBosely
one of us
posted Hide Post
ozhunter, here is Horneber web site: www.huelsen-horneber.de

Allen


It's a Mauser thing, you wouldn't understand.
 
Posts: 656 | Location: North of Prescott AZ | Registered: 25 October 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia