Has anyone got any load data for this one.
Thanks for any and all help.

Todd E

Todd,

You might want to get ahold of the A-square manual and reference the 500 Jeffrey data. I have a buddy that has a 500 AHR, but I don't know if he's worked up any loads in it yet.

Todd,

Saeed's reloading site has full powered loads listed for the 500 Jeffrey. As near as I can tell the 500 AHR is simply a Jeffrey with a longer neck and sharper shoulder angle.

All else being equal, loads for the 500 AHR would be very slightly greater than for the 500 Jeffrey.

Mike

Thanks,

I have already looked over the data on the reloading pages and it was a major help. I really was looking for data for heavier bullets. Again thanks!

Todd E

[This message has been edited by Todd E (edited 07-26-2001).]

Todd,

This is A-Square Data: 26" Barrel, 570 gr. Monolithic Solids

Min-H4895 100.0 1909fps 24700 CUP
Max-H4895 101.0 2303 38900
Min-IMR7828 100.0 1677 16700
Max-IMR7828 120.0 2050 30000
Min-RL15 101.0 2223 36700
Max-RL15 105.0 2291 39800
Max-IMR4064 101.0 2274 38900

If you compare this information with the Accurate Reloading pages you should get a good starting point for the 570 gr. The 600 gr. I would use Min load Reduced by 5% for the 600 and see what you get. The 600 gr. is only a 5% increase in weight over the 570 gr. and you should be safe. First I would shoot a min. load 570 gr. in your rifle to check it on a chronograph to see how the data compares with actual in your rifle.

Did you get your rifle from AHR? I have been looking at their rifles for some time and wanted to ask someone what they thought of: workmanship, finish, fit, and overall rifle?

Good hunting
Steve

------------------
Every man dies, but not every man really lives!!

Steve,

The rifle looks just like the one on the AHR website under DGR rifles. The metal fit and finish is good. I would get a synthetic stock though. Thanks for the data out of the A-Square manual I am sure it will be a big help.

Todd E