THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
7mm stw
 Login/Join
 
One of Us
posted
I need some load data for the 7mm STW using IMR 4530 powder behind a 140 grain serria Game king. can anyone help Me?
 
Posts: 36 | Registered: 12 March 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
using IMR 4530

??????????????????????????????
Do you mean IMR-4350? I personally think it's a trifle fast for this cartridge.
check here www.IMRpowder.com


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
I have considered IMR4350 too fast for use in this cartridge with 140 gr bullets, though I have used it to drive the 130 gr Barnes XBT to 3500 fps.

My note book shows that I have achieved in excess of 3400 fps using the 140 nosler Bal tip or the 140 Sierra SBT in combination with H4831, and RL22. I have not shot the 140's enough to give you any data about accuracy, I usually stay with the 160 gr class.

The Sierra manual does not list a load with 4350 and the 140 gr bullets.

IMR 4350 is the fastest powder listed with this bullet weight in Nosler #4. It shows 71.5 gr giving 3299 fps.

If possible, I bet you will find higher velocity numbers as well as better accuracy by using a slower powder such as H4831, RL22, IMR7828, WMR, Retumbo, or H1000. Nosler lists H4831 as the most accurate powder in their testing.


Idaho Shooter
 
Posts: 273 | Location: West Central Idaho | Registered: 15 December 2002Reply With Quote
one of us
Picture of fredj338
posted Hide Post
I agree w/ these guys, IMR831 is about as fast as I would go w/ the 140gr-150gr bullets in the STW. RL22, 7828, H1000 are all a better bet.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
one of us
posted Hide Post
I own two 7mmstw's and have owned a third.imr4350 is too fast to provide decent velocity with 140gr bullets with this cartridge.My guns all performed best with 140gr bullets using imr7828.
 
Posts: 3104 | Location: alberta,canada | Registered: 28 January 2002Reply With Quote
one of us
Picture of ricciardelli
posted Hide Post
I'll answer your question...

IMR-4350 From 67.0 grains to 72.0 grains
Federal 215 Primer

However I have to agree that IMR-4350 was not my powder of choice. I prefered:

WMR From 64.3 grains to 77.7 grains
Federal 215 Primer
 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
One of Us
posted Hide Post
I agree with all of you however heres my problem. I do a lot of reloading for a freind and he shoots a lot of differant calabers and I just dont have the storage space to keep all kinds of powders for him so What I do is use IMR 4198. 4064 and 4350 for all of his shooting needs. So far its worked out pretty well. But then again his and my idea of accuracy and performance are intirely two differant things.
 
Posts: 36 | Registered: 12 March 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia