The neck sizer should be knurled. Carefully grab a hold of that with pliers and Take a screw driver in the other end of the decapping/neck sizer and loosen the knurled neck sizer.
This will loosen up its grip on the decapper pin and you can slide or pull it out. Place a new one in there and retighten and you are ready to go.
Posts: 554 | Location: CT | Registered: 17 May 2008
lee's have that slider thing you just loosen up the nut on the top and slide it back in and tighten the crap outta the nut they take a 9-1/16th's or 1/2 and a 3/4 to do this you might wanna gring it up a bit rough before you put it back in. or just get pissed and throw it out in the pasture like i did, and buy rcbs.or redding.
Posts: 5037 | Location: soda springs,id | Registered: 02 April 2008
