Go | New | Find | Notify | Tools | Reply |
One of Us |
Hi! What is the correct shell holder for the 7 x 57R? ( or the 6.5 x 57R, 6.5 x 65R, 7 x 65R, .30 Blaser, 8 x 57 IRS, 9.3 x 74R - I am not sure they are all identical? ). Shell Holder identified by Number from RCBS or LEE, and/or by cases which it is known for ( e.g. "Shell holder for .30-06, for 6.5 x 55, ... ) Thanx in advance, Hermann formerly, before software update, known as "aHunter", lost 1000 posts in a minute | ||
|
one of us |
For 6.5x57R, 7x57R, 7x65R, 8x57IRS - you need RCBS #26. For 6.x65R, .30R Blaser, 9.3x74R - RCBS # 4 - mike ********************* The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart | |||
|
One of Us |
THANKS, Mike! I´ll use those Numbers for the die set. What are the corresponding LEE numbers, as I need LEE numbers for their unique "Case Shell holder and length Gauge". ( or for what cartridges are those two shell holders else? ) H formerly, before software update, known as "aHunter", lost 1000 posts in a minute | |||
|
new member |
LEE #11 is what I use in my 7X57R | |||
|
One of Us |
Velvetant, could you check please? I own LEE # 11 for the .44 Mag, just tried: a fired 7 x 57R case from RWS did not ( not tolerances, it definitely did not ) fit! # 11 ( I used LEE SH´s for the trimmer and for the Auto Prime ) is too small. Greetings, Hermann formerly, before software update, known as "aHunter", lost 1000 posts in a minute | |||
|
One of Us |
Thanks again! Those are the RCBS #´s for the belted Magnum case. Would mean LEE # 5? I just checked: yes, the 7 x 57R case is at the rim VERY similar ( in diameter and rim thickness ) to the belted Magnum Case head! Just as I had some fired cases at hand, I also noted, how similar 7 x 57R and .303 are ... WH H formerly, before software update, known as "aHunter", lost 1000 posts in a minute | |||
|
one of us |
A Lee #5 will probably be close enough to use - it might be a bit sloppy around the case body, but the rim should hold. Lee specifies the #5 for the .303 as well... See bottom of this page: http://www.leeprecision.com/cgi/catalog/browse.cgi?1178...atalog/primtool.html - mike ********************* The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart | |||
|
One of Us |
It is the RCBS No. 26 shellholder (or equivalent from other makes), and it works with 6.5X57R, 7X57R, 8X57R, 8X60R, 8X75R, 9.3X74R, and even .405 Winchester, to name a few..... "Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen." | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia