The Accurate Reloading Forums
dam gremlins!!!!!

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/285105555

18 October 2006, 06:33
exsanguinate
dam gremlins!!!!!
i went to do some reloading on my dillon 550 and the return spring on the primer seating bar was MIA. after looking around, i found it on the ground, but it was dang near 18" long (it should be only 1.5") Mad i don't know if the gremlins grabbed it and pulled till it broke off or what, but it's DOA!!! looks like it will take me a bit longer to reload my hunting ammo for this weekend Frowner
18 October 2006, 19:20
wtman
that always makes for a bad day. I bet it were gremlins too. wkend before last i took my 300 and /06 to the range. Gremlins had taken the bolt out of my /06 and left it on my cleaning bench.
18 October 2006, 19:24
butchloc
hardware stores usually have a cabinet of springs that you should be able to get one to match up close enuf for cheap
19 October 2006, 05:23
hm1996
quote:
Gremlins had taken the bolt out of my /06 and left it on my cleaning bench.


Ya got them same gremlins in Colorado, too? Wink

Regards,
hm


2 Chronicles 7:14:
If my people, who are called by my name, will humble themselves and pray and seek my face and turn from their wicked ways, then will I hear from heaven and will forgive their sin and will heal their land.
19 October 2006, 09:19
exsanguinate
i emailed dillon and they sent a spring free of charge. when this happened, i was going to go to the hardware store, but they were closed. i went there today and found a spring that worked. from now on, my door to the reloading room stays locked Smiler
19 October 2006, 19:23
Pegleg
I've had Gremlins pick the lock on my loading room. Be careful. I now employ a set gun. Big Grin


The only easy day is yesterday!