Originally posted by BaxterB: My brother uses the 120TSX over 44.5gr of R15 and gets about 2930 out of it. BUT of course work up to it for your gun....
you forget the moly......
that load needs some work, but shoots fine as is..
I've been using 48g or H414 with the hornady 139grs, this is my metallic silloutte load and tracts perfectly on the ballictic tables for come up/downs at 2900fps. In my vanguard 24" barrel
Posts: 131 | Location: Southern WI | Registered: 09 March 2007
48 grains of H414 under a 140 grain nosler ballistic tip. Some books say this is well over max. But the hotter I pushed them the more accurate the rifle shot. I am getting about 2800 fps out of a 18 barreled model 7. I get ragged holes for groups. Sighted in at 250 and I am good out to about 350 without any adjustment or hold over. Longest shot I have taken was 310. Hit low lungs deer went about 90 yards. Bullet exited and did plenty of damage.
In a number of Rem 700's a bud of mine 's fav. load is with IMR 4350 powder and the Speer 145gr bullet, a moose and elk killer and a great grouper at distance, but nothing special on paper at 100 yards. FS
Posts: 698 | Location: Edmonton Alberta | Registered: 18 January 2005