THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Re: Nosler loads for 300WM wanted
 Login/Join
 
one of us
posted
Quote:

Quote:


What barrel do you have ? Twistrate ?

I use a Lothar Wather 1/10




Iam sorry. I didnt see that you were using Nosler's when I posted before.

My rifle is a Sako 75
25 5/8" barrel
1:11 twist

I am green with envy at you barrel selection. Folks are talking about L/W barrels in very high regard!!

It's not one of Jeff Hicks rigs is it?? HD rifles??..sakofan..
 
Posts: 1379 | Location: North Carolina | Registered: 11 March 2003Reply With Quote
one of us
posted Hide Post
I just got back from the range. Shot some Sierra Game Kings, 180gr. using H1000, Fed. primers, and great results.

3 shot group was about was sub moa..



I know Iam the exception, but I cant seem to wring the accuracy from the RL22. And I have tried!! Great velocity though. And it still shoots about 1" at 100 yds....sakofan...
 
Posts: 1379 | Location: North Carolina | Registered: 11 March 2003Reply With Quote
one of us
posted Hide Post
[quote
My rifle is a Sako 75
25 5/8" barrel
1:11 twist

I am green with envy at you barrel selection. Folks are talking about L/W barrels in very high regard!!

It's not one of Jeff Hicks rigs is it?? HD rifles??..sakofan..




My rifle is my own composition, mounted by a local gunsmith.Barell is "heavy varmint match" type. Right now i am looking for Nosler Accubond/Bal.Tip-loads (180grs).
Btw: If i had enough cash i would have bought a Sako TRG 42 in 338LM . That is a rig that kick's like a mule
I must admit that i am a Sako-fan too
 
Posts: 64 | Location: Norway | Registered: 07 March 2004Reply With Quote
one of us
posted Hide Post
I've tried IMR4831 & 4350, and RL22 with Fed 215, WLRM, and CCI 250 primers in my M70 classic. Most accurate combination (sub-MOA) in my rifle was a 2960 fps load with IMR 4350 and WLRM primers with bullets seated about 0.0030 off the lands. A dime nicely covered my best 100-yard group of 7 shots (why 7 and not 4 or 6 or 8 I can't recall). Cases were Remington, fire-formed in my rifle.

But just about every combination I tried shot pretty darn well and I didn't fiddle with seating length with all of the combinations.

Good luck. -WSJ
 
Posts: 300 | Location: Western New York | Registered: 03 January 2004Reply With Quote
one of us
posted Hide Post
Quote:

with bullets seated about 0.0030 off the lands.
Good luck. -WSJ




I guess you mean 0,03 off the lands. In a good and thight chamber i normally use between 0.5mm -> 2mm depending on the bullet-lenght.

What loads and what bullets do you use then ?
 
Posts: 64 | Location: Norway | Registered: 07 March 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia