THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
What's the most versitile powder, caliber wise?
 Login/Join
 
One of Us
posted
I was just wondering what the most versatile powder is that would work for a 30-06, 35 remington, 375 h&h, 303 british, 8mm mauser, 45-70, .223 rem, or 338 win mag. it doesn't have to work perfect for all calibers but must be able to be used in most calibers with close to factory specs for velocity
 
Posts: 973 | Location: Rapid City, SD | Registered: 08 July 2005Reply With Quote
One of Us
posted Hide Post
4064 or one of the 4895's will do it if need be in most bullet weights for the calibers listed, 338 is kind of the odd man out in this line-up and benefits from a slower burn rate. FWIW I load for or have loaded for all calibers listed except the 35 rem, and have used one of the above powders at one time or another.
 
Posts: 1681 | Registered: 15 October 2006Reply With Quote
One of Us
posted Hide Post
4064 was my first thought too. The odd man left out is fine as long as it's better for most of them. the 338 was honestly the last one I would need the powder for. Thanks for the reply. I'm really looking for a powder I could stock up on to use for multiple calibers if the need arise. I probably wont need it, but it would be nice to have a very versatile powder on hand.
 
Posts: 973 | Location: Rapid City, SD | Registered: 08 July 2005Reply With Quote
one of us
Picture of CLL
posted Hide Post
Extruded IMR4350
Ball H380
For use in rifles
Unique in pistoles
Lots of data available for theese , as well as 4064 and 4895


I Might Be Tired From Hunting ,
But I Will Never Tire Of Hunting .
 
Posts: 200 | Location: CA,U.S.A. | Registered: 14 March 2002Reply With Quote
one of us
posted Hide Post
4895 would be my first choice as very versatile.
 
Posts: 4799 | Location: Lehigh county, PA | Registered: 17 October 2002Reply With Quote
One of Us
posted Hide Post
4895.

Larry Gibson
 
Posts: 1489 | Location: University Place, WA | Registered: 18 October 2005Reply With Quote
One of Us
Picture of bartsche
posted Hide Post
popcornAccurate 2520 ain't all bad. beerroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
one of us
posted Hide Post
RL-15
4064
4895
 
Posts: 1137 | Location: SouthCarolina | Registered: 07 July 2004Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by gohip2000:
..the most versatile powder is that would work for a 30-06, 35 remington, 375 h&h, 303 british, 8mm mauser, 45-70, .223 rem, or 338 win mag. ...with close to factory specs for velocity
There is no Powder that fits this criteria.
 
Posts: 9920 | Location: Carolinas, USA | Registered: 22 April 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Hot Core:
quote:
Originally posted by gohip2000:
..the most versatile powder is that would work for a 30-06, 35 remington, 375 h&h, 303 british, 8mm mauser, 45-70, .223 rem, or 338 win mag. ...with close to factory specs for velocity
There is no Powder that fits this criteria.

Well, I just checked the IMR load data and IMR 4064 gets all these cartidges very close to or exceeding factory velocity.
 
Posts: 973 | Location: Rapid City, SD | Registered: 08 July 2005Reply With Quote
One of Us
posted Hide Post
quote:
Well, I just checked the IMR load data and IMR 4064 gets all these cartidges very close to or exceeding factory velocity.

You are correct.
 
Posts: 1681 | Registered: 15 October 2006Reply With Quote
one of us
Picture of Doc
posted Hide Post
IMR 4064 was my first thought, then IMR 4350.

What about H414?


Ted Kennedy's car has killed more people than my guns
 
Posts: 7906 | Registered: 05 July 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by Hot Core:
quote:
Originally posted by gohip2000:
..the most versatile powder is that would work for a 30-06, 35 remington, 375 h&h, 303 british, 8mm mauser, 45-70, .223 rem, or 338 win mag. ...with close to factory specs for velocity
There is no Powder that fits this criteria.

Given that one should have at least two different powders to load the 110 and 220 grain bullet in the .30-06 alone and neither of the ones I'd choose will work well in the .223 and I have no experience with the many different loadings of the .45-70 I'd have to agree with Hot Core on this.

That said there are a few pwders that would do well in a large variety of cartridges and these include
H-4895, IMR-4064, Rl-15, H-414, BL-C(2), H-4350 and H-4831.....if these are in your powder cabinet then you're pretty set for rifle cartridge reloading.....but just one?????


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
4064 RL15 ect.
 
Posts: 19617 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
RL7, I use RL7 in my 223's and in my 45-70's. Tom.


WEST BY GOD VIRGINIA
 
Posts: 248 | Location: RIVESVILLE, WV | Registered: 20 August 2007Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by gohip2000:
...Well, I just checked the IMR load data and IMR 4064 gets all these cartidges very close to or exceeding factory velocity.
It is a great Powder in "some" rifles. I hope it works well for you in yours.
 
Posts: 9920 | Location: Carolinas, USA | Registered: 22 April 2001Reply With Quote
Moderator
Picture of Paul H
posted Hide Post
Don't try to get hung up on one or two powders to cover all your chamberings. Ever heard the saying about jack of all trades but master of none?

The whoe reason to handload is to put together quality ammo, and to do that you need the best powder for the task.

You could probably cover most of your bases with Reloader 7, Reloader 15, and Hodgdon 4350. But if you aren't getting the performance you desire in one of those chamberings, don't hesitate to try another powder.


__________________________________________________
The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time.
 
Posts: 7213 | Location: Alaska | Registered: 27 February 2001Reply With Quote
one of us
posted Hide Post
4895 is close enough for horseshoes, hand grenades and thermonuclear weapons....
 
Posts: 9207 | Registered: 22 November 2002Reply With Quote
One of Us
posted Hide Post
yeah, I like my variety of powders, I was just getting an idea of what could be used in a pinch if I ran out of my choice powders.
I've used RL19, RL7, IMR4064, IMR4350, HBenchmark, H4895.

OK, since this thread is still going pretty well, what is the best powder to get factory velocities that are accurate in the 375h&h with 235gr and 270 gr bullets?
I had some 4064 left over and am using that now with the speer 235 gr bullet at around 2700 fps.
Is this an accurate powder for light weight bullets in this caliber?
 
Posts: 973 | Location: Rapid City, SD | Registered: 08 July 2005Reply With Quote
One of Us
posted Hide Post
for me I use Reloader 15. I use this powder in my 375 ruger, 35 whelen, 7mm mag and 9.3x62 with outstanding accuracy and the velocity is there also.
 
Posts: 81 | Location: whidbey island | Registered: 15 March 2007Reply With Quote
One of Us
posted Hide Post
I have used AA3100 in just about everything from .220 swift to .338 WM. Slow burning, not a lot of velocity in some loads, but then I don't load anything to max velocity anyway.
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
One of Us
posted Hide Post
When my Step Dad hit the scene right after WW II, he only had two powders in the house. And he loaded for a lot of different chamberings.
One was 4064, and the other was 4227 for his Hornet. He never had any other powders in the house... I still get a chuckle out of that Big Grin

Don




 
Posts: 5798 | Registered: 10 July 2004Reply With Quote
One of Us
posted Hide Post
IMR4350 I use it in, and it gives best accuracy in my: .243, 30-06, 8mm, 7mm-08, 338 mag, .375 H&H and my old .460 Weatherby. And everything in between it has worked very well indeed.
 
Posts: 1324 | Location: Oregon rain forests | Registered: 30 December 2007Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
I too try to find a single powder...

You can get close but not perfect.

I have found 4895, 4350, and Varget to be very versatile powders


Mike

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10138 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
one of us
posted Hide Post
RL-15
 
Posts: 1137 | Location: SouthCarolina | Registered: 07 July 2004Reply With Quote
one of us
Picture of fredj338
posted Hide Post
I agree w/ Hotcore, no single powder is going to give you factory vel. across the bullet spectrum. That said, a med. burner like 4064, RL15 or VV150 will "work". The compromise will be the 338winmag & maybe the 45-70.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
One of Us
Picture of Wstrnhuntr
posted Hide Post
All those rifles and only one powder... What fun is that??

I have a funny kind of idea about my rifle loads which is that if I cant get it to perform on par with factory velocities (or at least close) then I need to fix it. That would be hard to do with only one powder.
 
Posts: 10173 | Location: Tooele, Ut | Registered: 27 September 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia