THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Partition noses
 Login/Join
 
one of us
posted
This came up briefly on another thread, but was never fully explored:

Is the front jacket on a Nosler Partition any thicker, or the nose otherwise made "tougher", on heavier bullets WITHIN THE SAME CALIBER? That is, does the 250 grain .338 have a less expansive nose than the 210 .338? My understanding is that the nose jackets and lead composition is very similar in all weights within a caliber (although the partition positions are certainly different), while others argue that they are "harder" with the heavier weights. How about it, all of you bullet-sectioning fanatics?
 
Posts: 13263 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
one of us
Picture of Jay Gorski
posted Hide Post
Stonecreek, Nosler's # is 1-800-285-3701, J
 
Posts: 1745 | Location: WI. | Registered: 19 May 2003Reply With Quote
One of Us
Picture of Wstrnhuntr
posted Hide Post
Does it matter? The fact that they reliably shed the frontal core kind of makes this a moot point IMO.
 
Posts: 10188 | Location: Tooele, Ut | Registered: 27 September 2001Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by Wstrnhuntr:
Does it matter? The fact that they reliably shed the frontal core kind of makes this a moot point IMO.

It is, admittedly, a somewhat academic question. I ask it because there seems to be an impression with some shooters that the additional penetration with the heavier Nosler Partitions is due, in some way, to a different design of the nose. I do not believe this to be the case and am seeking the opinions/experience of others on the subject.

BTW, in my opinion, it is the relatively rapid expansiveness of the Partition's front "half" that has given it its reputation as a sure killer, much more so than the penetration qualities of its rear "half". Elk usually die from having their hearts and lungs shredded by the action of the front portion, not from having their off-shoulder drilled with a caliber-size hole from the rear portion. There are occasions in which the action of the rear portion is important, but they are the exceptions and not the rule. We all like the "insurance" of the deep penetration of the rear core in those relatively rare circumstances.
 
Posts: 13263 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia