THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
New Alliant 300 MP
 Login/Join
 
one of us
Picture of Bill/Oregon
posted
Tried some of this new magnum pistol powder in my Ruger SBH .44 Magnum with 10 1/2-inch barrel, and I am impressed. I was shooting with open sights off a rest at 25 yards, 25.0 grains 300 MP, Starline brass, Federal 150 primer and Hornady 240-grain XTP. My best group was 1.1 inches with three holes touching; the other was just a smidge bigger but with four holes touching. Next range visit I will bring the chronograph. This powder outshot my usual load of 24 grains 296.


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16685 | Location: Las Cruces, NM | Registered: 03 June 2000Reply With Quote
one of us
posted Hide Post
Without chronograph data it is hard to say, but it sounds like it is very much in the range of Hodgdon's Lil Gun. Have you tried that powder? Although I (seemingly in the minority) don't care at all for Lil Gun in a Hornet, it does do well for me in magnum handguns. I'm curious if this new Alliant 300 MP will also work in small rifle calibers?
 
Posts: 13266 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
Stonecreek: No, haven't tried LilGun yet. I hear good things about it though.


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16685 | Location: Las Cruces, NM | Registered: 03 June 2000Reply With Quote
one of us
posted Hide Post
300MP is a Power Pro powder which there are several versions.


http://www.alliantpowder.com/p...owder/power_pro.aspx


quote:
Power Pro™ Powders

Each Power Pro powder is engineered for a specific use - please carefully note the use designation and match to your shooting and hunting needs.

* Manufactured in the USA
* Improved velocity and density for more efficient metering and loading
* Designed for magnum pistol, light varmint and light/medium/magnum rifles
* Enables reloaders to duplicate certain factory loaded ammunition
* Designed for specific cartridges and applications
* Density designed for proper cartridge fit
 
Posts: 1615 | Location: Washington State | Registered: 27 May 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia