Hi first time here great forum,
any body got ant data for .243 loads from sierra
70grn, Blitzkings.
95grn, Hornady SST.
100grn, Hornady Interlocks.
The rifle im useing is a CZ550 American
24" barrel and i will be moly coating the barrel
& bullets any info will be greatly wellcome

TY ricciardelli
that was one quick reply

My favorite for the 100g Hornady BTSPI is 44.0g of AA 3100, CCI BR2 Primer, RP Nickle Brass. It drops em' in their tracks if you hit 'em where you should. It's a full power load so drop down and work up.

Scout Master 54

ty scout master but try to get aa powder and ccibr2 primmers here is impossable ive tried 39grns H414 with rem 9/1/2it just dont like it at all im trying vith n160 atm. but ty anyway

Hi Blitzking.
I'm new at this as well.
Try Varget/Fed match primer with light bullet and RE 22,95/100g & CCI 250, .5 thou off lands.
Cheers Rob T

[ 06-12-2003, 03:36: Message edited by: Rob T ]

Blitzking...sorry to hear you cannot locate a source for AA 3100. It's a good slow powder and from my Rem. 700 was the first powder to realy make the sub. MOA mark from it. AA 2700 has become another favorite of mine too. With some work IMR 4350 has proven to work well for me too.

Good Luck,

Scout Master 54

Dear Scout Master 54.

In the UK most gunshops have a reliable supply of Alliant,Hodgon and Vihtavuori powders only.
A few have IMR and AA powders but if you cant collect through distance and they have to be delivered the cost is prohibitive due to legislation.
I can only dream of IMR 3031 for my 75g VMAX's
Cheers Rob T.

[ 06-14-2003, 02:40: Message edited by: Rob T ]

Blitzking,

Welcome to the site, I hope you enjoy it.

ty big bob for the welcome and yes i ham enjoying the forum