I'm looking for some suggestions for loads for my 375 H&H. I'm an infrequent reloader and don't have time for much trial and error. I'll likely buy some powder and bullets and stick with them. I'd like to come up with two loads, a softpoint and a solid. I'd like to get both to shoot to about the same point of impact. My initial thoughts are to use 4350 powder (also works for my 30-06), and the Nosler partition 300 gr. I'm still deciding on a good solid (Hornady?). Any suggestions on the solid and some good, consistent loads would be appreciated. By the way, the rifle is a cz550.

Cartridge:.375 H&H Magnum
Bullet:Sierra 300 Grain Spitzer Boat Tail
Powder:78.7 grains of IMR-4350
Primer:Remington 9-1/2M
Case:Winchester
Firearm:Ruger
Velocity:2596 FPS @ 15' from muzzle

OK, here's a load that worked for me with 300gr Hornady RNs and solids ( the old kind) Swift A FRames, Nosler Partitions and Barnes Xs. 2550 fps out of a Mod 70 Winchester.
76.0gr of H-414
Winchester Brass
Fed 215 Primer
Absolutely no pressure problems in weather ranging from 35 deg to 105 deg inZimbabwe. 3/8" groups@ 100. Let us know how you make out! jorge