One of Us
| I tried a lot of powders. My twist was factory, and hence, too slow. |
| | | Posts: 831 | Location: Virginia | Registered: 28 January 2005 | 
IP
|
|
One of Us
| My twist is 1 in 9.25". I hope its sufficient. I'm getting decent groups with my initial trial of H1000 at the 100 yard mark. We'll see how well they stabilize at longer ranges when I finalize my load. Has anyone tried h4831 or 4350? |
| | | Posts: 428 | Location: Bozeman, MT | Registered: 04 January 2005 |
IP
|
|
One of Us
| elkhunter
The powder you're using is a good choice along with IMR7828 and RL22 for the A-Max. I like 40.0 gr of IMR4350. |
| | | Posts: 1679 | Location: Renton, WA. | Registered: 16 December 2005 |
IP
|
|
one of us
| Retumbo From 46.0 grains to 49.0 grains Remington 9-1/2 Primer |
| | | Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002 |
IP
|
|
