Go | New | Find | Notify | Tools | Reply |
one of us |
I have been reloading for more years than I care to remember. But I always wanted to know if brass manufacturers made brass in different strengths. For Example the 308 has a max pressure of aprox 60k and the 7x57 has a max pressure of 51k and a 30-06 aprox 58k. The W.S.M. go to aprox 63k and so on. Is the brass made only to withstand the specs? (give or take 10%) Or are they all the same. | ||
|
One of Us |
I dont think they make it stronger for each type of shell " 30-30 308 " but say each brand has a differant softness to them, I think its Norma or Lapua that has about the softest brass, but for say a 30-30 is thinner than for a 308, for use with the higher PSI. Dwindling the worlds lead supply one cat at a time!! | |||
|
One of Us |
They all vary but the brunt of the pressure seems to be in the web area if the brass is built heavier in certain areas I would speculate that it is in the web. This seems to be true in the old pistol cartridges rolled vs drawn? No expert just blips of info I have run across. If it cant be Grown it has to be Mined! Devoted member of Newmont mining company Underground Mine rescue team. Carlin East,Deep Star ,Leeville,Deep Post ,Chukar and now Exodus Where next? Pete Bajo to train newbies on long hole stoping and proper blasting techniques. Back to Exodus mine again learning teaching and operating autonomous loaders in the underground. Bringing everyday life to most individuals 8' at a time! | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia