The Accurate Reloading Forums
300RUM/TSX/200gr/Test Results

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/205104766

23 August 2007, 09:07
kraky
300RUM/TSX/200gr/Test Results
OH BOY............................
23 August 2007, 11:56
shootaway
POP,Remington cases will not shoot half inch groups at 200yds.
23 August 2007, 18:23
POP
quote:
Originally posted by shootaway:
POP,Remington cases will not shoot half inch groups at 200yds.


I posted the .675" group at 300 yards
I also shot the 150 gr SST at 3500 fps and they did 1.25" at 300 yards. Both of these groups from my Sako 75 .


The following groups are from my 700 LSS.
159 grain Groove bullets at 200 yards!

All used Remington Brass buddy!




My blog: Please Comment and Follow
https://thehandloadinglog.wordpress.com
23 August 2007, 19:19
shootaway
Stop FAKING it.
23 August 2007, 20:21
POP
quote:
Originally posted by shootaway:
Stop FAKING it.


With all due respect sir but I think I am trying to reason with my 6 year old daughter.

Nuff said!


My blog: Please Comment and Follow
https://thehandloadinglog.wordpress.com
23 August 2007, 20:29
Bob in TX
quote:
I found that I knew MORE THAN ANYONE.


.......now that's funny!!! Big Grin


There is room for all of God's creatures....right next to the mashed potatoes.
http://texaspredatorposse.ipbhost.com/
23 August 2007, 21:06
GeorgeS
quote:
Originally posted by POP:
quote:
Originally posted by shootaway:
Stop FAKING it.


With all due respect sir but I think I am trying to reason with my 6 year old daughter.

Nuff said!


shootaway,
POP is not faking anything. I have seen the man shoot exceedingly small groups at 300yds. with .300RUM and .378Wby. rifles, on an outdoor range in Wyoming.
He is a meticulous handloader, and he has excellent bench technique.

Have you checked the weight and case capacity of that Remington brass? You may find that case weight and capacity may be wildly inconsistent.

If you're getting poor groups using 'cull' or 'ebay' brass with inconsistent internal dimensions, then get excellent groups using premium brass (which is generally far more consistent), I would not be surprised.

George


23 August 2007, 22:34
Heat
popcorn

This is as good as the political forum.

Ken....


"The trouble with our liberal friends is not that they are ignorant, but that they know so much that isn't so. " - Ronald Reagan
23 August 2007, 22:50
GSP7
What a crack up! Too funny! Big Grin Big Grin rotflmo rotflmo
23 August 2007, 23:59
shootaway
It is possible that I got my hands on some very poor lots of Remington brass in the past year.I only once shot Remington brass a few years before reloading with them in my 300WM Sendero in the form of Remington factory loads and they grouped a little over an inch at 200yds.However the Rem brass I used in my 300WM and RUM these past two years was good for nothing.George,the Rem brass I got was purchased fro a reputable dealer and came in the original sealed bags.
24 August 2007, 03:18
djpaintles
quote:
Originally posted by POP:
quote:
Originally posted by shootaway:
Stop FAKING it.


With all due respect sir but I think I am trying to reason with my 6 year old daughter.

Nuff said!


POP, You should be ashamed of yourself insulting the intelligence of your 6 year old daughter like that! banana ..................dj


....Remember that this is all supposed to be for fun!..................
24 August 2007, 04:11
Canuck
quote:
Originally posted by shootaway:
I found that I knew MORE THAN ANYONE.

quote:
Originally posted by stubblejumper:
At first I was amazed at the arrogance he displayed,but then I saw that he lives in Quebec and his attitude is quite typical for where he lives.


No offence to most Quebecer's but I always picture...
"Salut! I am Shootaway. You are very pleased to meet me!"
...like the old Celine Dion joke.

rotflmo animal

Canuck



24 August 2007, 08:29
kraky
C'mon Vapo.....a year or so back I was debating Shootaway and you sent me a PM and said just ignore him....you should take your own medicine here.
24 August 2007, 15:03
vapodog
quote:
Originally posted by kraky:
C'mon Vapo.....a year or so back I was debating Shootaway and you sent me a PM and said just ignore him....you should take your own medicine here.

I remember that.....and you are correct.
Thanks for reminding me.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
24 August 2007, 18:35
POP
quote:
Originally posted by djpaintles:
quote:
Originally posted by POP:
quote:
Originally posted by shootaway:
Stop FAKING it.


With all due respect sir but I think I am trying to reason with my 6 year old daughter.

Nuff said!


POP, You should be ashamed of yourself insulting the intelligence of your 6 year old daughter like that! banana ..................dj




You reminded me of a "1980's line":

Man! that is cold!


My blog: Please Comment and Follow
https://thehandloadinglog.wordpress.com
25 August 2007, 00:20
.366torque
If a 7MM wears out at 70 rounds the 300 RUM should be about worn. Time for a new one! animal

Seriously though, why are you guys arguing with a turnip. Shitaway is a degenerate, from a long line of inbreeding. With Fetal Acohol Syndrome thrown in. To cap it off he's from the cesspool of Canada, our national embarrassment montreal. It's full of arrogant ignorance. A race of people who are happy living in complete idiocy. You are trying to converse with their yearly winner of the "Most Dense" award. I could go on and on with the denigration (actually the truth) of such a "worthy" recipient. However "Shit for Brains" is a waste of time as he probably doesn't understand. (a problem with the dense)
25 August 2007, 00:29
jjmp
shootaway
its not your brass,barnes tsx bullets are all copper, copper as you know is soft, .....to break in a barrel you need a hard jacketed bullet like sierra. by moly coating your 200 grain tsx's and shooting them threw your new 700 ...300 rum barrel your coating your barrel with moly,this will slow down barrel break inn to almost nothing,even with the same bullets un-coated they copper foul your barrel because the barrel inside is not smooth yet from shooting. listen to the great advice your given here ......why play the guy people just laugh at,your smarter than that my friend! stop pulling our legs,regards
25 August 2007, 01:09
shootaway
This thread is getting an OVERLOAD of trolls. troll troll troll troll troll troll troll troll troll troll troll troll troll troll troll there's Vapodog,he stands apart with the most posts. troll Here's a couple from BC. troll troll Here is a fakester trolland another troll
25 August 2007, 03:17
Canuck
quote:
Originally posted by shootaway:
...Here's a couple from BC. troll troll


animal rotflmo animal rotflmo animal



25 August 2007, 03:22
stubblejumper
And then of course there is Shootaway digging himself deeper and deeper into a hole.With luck,someone will come along and cover it up,Shootaway and all.

diggin
25 August 2007, 04:08
GSP7
quote:
Originally posted by stubblejumper:
And then of course there is Shootaway digging himself deeper and deeper into a hole.With luck,someone will come along and cover it up,Shootaway and all.

diggin


I dont think He would care or be aware if he was in a hole or even covered with dirt. He could still shoot 200yd 1/2" groups with his 300rum under ground, no doubt! Big Grin Big Grin rotflmo
25 August 2007, 06:15
POP
Fellas at the risk of being blamed of adding fuel to the fire.....

I just got another brand new in the box Rem 700 LSS today.

95 gr retumbo with 200 gr accubond.......3050 fps .95"/100 yds
92 gr RL 25 with 200 gr Accubonds .........3165 fps .78"/100 yds

Both groups with Remington Brass. 3 witnesses.


My blog: Please Comment and Follow
https://thehandloadinglog.wordpress.com
25 August 2007, 06:33
Hipster
quote:
Looks like everyone can out shoot me.



Not me unless you are dead drunk and sleeping at home in your bed and not shooting while I am at the range shooting.


I entered these forums a few years ago thinking that I new nothing compared to most here and that was true in many forums,but when it came down to shooting for accuracy I found that I knew MORE THAN ANYONE.



Well If you are that good why the FUCK aren't you teaching our millitary boys how to make cold shot kills and get the very best out of their gear in the stan? Hell you should be able just to walk through a rifle range and your presence should alone improve every shooter present. rotflmo


Thanks pal I am in tears laughing you have just added years to my life with the stress release. I sure do like maple syrup sweet but not very filling product of quebec!
25 August 2007, 09:42
shootaway
quote:
Originally posted by POP:
Fellas at the risk of being blamed of adding fuel to the fire.....

I just got another brand new in the box Rem 700 LSS today.

95 gr retumbo with 200 gr accubond.......3050 fps .95"/100 yds
92 gr RL 25 with 200 gr Accubonds .........3165 fps .78"/100 yds

Both groups with Remington Brass. 3 witnesses.
You said you have six rifles in this caliber.Why would you want another,especially, if they shoot small groups as you claim?
25 August 2007, 11:01
Blair338/378
quote:
Originally posted by stubblejumper:
My 300ultramag has no issues at all with remington cases.The groups below are 100 yard groups.


Bloody nice shooting stubblejumper Big Grin thumb

Remington cases, eh???????? bewildered


Verbera!, Iugula!, Iugula!!!

Blair.

25 August 2007, 19:16
POP
quote:
Originally posted by shootaway:
quote:
Originally posted by POP:
Fellas at the risk of being blamed of adding fuel to the fire.....

I just got another brand new in the box Rem 700 LSS today.

95 gr retumbo with 200 gr accubond.......3050 fps .95"/100 yds
92 gr RL 25 with 200 gr Accubonds .........3165 fps .78"/100 yds

Both groups with Remington Brass. 3 witnesses.
You said you have six rifles in this caliber.Why would you want another,especially, if they shoot small groups as you claim?


No Sir:

I said I have "owned" six rifles. Actually 7 I forgot about the Rem KS from the custom shop.
Up until yesterday I did not own a 30 cal of any kind,

I now own.

264 win mag Sendero II
300 RUM Rem 700 LSS
416 WBY MKV Classicmark II that is it!
Oh, and I have a 358 model 7 custom coming.


My blog: Please Comment and Follow
https://thehandloadinglog.wordpress.com
25 August 2007, 21:37
Tyler Kemp
...someones angry at the world.


Love shooting precision and long range. Big bores too!

Recent college grad, started a company called MK Machining where I'm developing a bullpup rifle chassis system.