Go | New | Find | Notify | Tools | Reply |
new member |
Hello: I am new to this forum, and was woundring if anyone might have any knowlage of realoading for the 338ULTRAMAG. Hope this is not a woreout topic here! But it is hard to find anything for this round. Any help would be appricated. I found a little information at the Barnes web site. But I have alot of trouble with their bullets fouling in my guns. Thank You for your time. rum shooter. | ||
|
one of us |
I have two and both like Reloader-25 and 250 grain Hornadys or Nosler Partitions. Depending on the powder lot, and whichever bullet, I use about 91 to 93 grains. ***That is a Maximum load!*** But that seems to be where those rifles are most accurate. H1000 was in second place if I remember right. Retumbo is supposed to be good also. Joe | |||
|
one of us |
| |||
|
One of Us |
Rumshooter, As you are new to this site you might be unaware that there is a separate section which listsa great deal pf loading data from Saeed's own testing and sometimes a few other shooters. Here the 338 Ultra and there is Saeeds data plus data from one other shooter....Mike http://www.accuratereloading.com/338rum.html | |||
|
one of us |
There is alot of data on the Hogdon site:http://www.hodgdon.com/data/rifle/338ultral.php The new Hornady manual alos covers the RUMS. Good luck, happy reloading. | |||
|
new member |
Hey guys. Thank you for all of your help. Sure found alot of info from the web sites you sent in you replys. Thanks again. Leonard | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia