Hi.

I would like to reload the 6x62 Frères with 95grn. Nosler Partition.
I have N160, N165, R905 and R907 powder here.

Who can help me with informations/maximum loads?

Thanks Roger

Found this:

http://www.chuckhawks.com/6x62_6x62R.htm

http://www.lhs-germany.de/uplo...ia/6_x_62_mm__R_.pdf

Never heard of it, but it looks like some sort of fireball!

Ammoguide has no loads for the 6 x 62mm Freres.

It's a German design from the 1990s and has a P max of 62,366 psi

According to QL, N 160, N 165, and R 905 seem to work will at 92 to 95% fill rates. R 907 gets to hot to fast.

I have no published load information for it.

QL predicted data (for seating depth estimated from seating depth used in .243 Win for 95gr Nosler part. bullet):










Jiri

A Blaser proprietary caliber, manufactured in Thun (near Bern, SW). Very hot, fast and leaving lots of copper in the bore (I also expect short barrel life). It is also quite destructive on venison at shorter ranges. Typicaly a mountain cartridge, due to its flat trajectory and the compact package when mated with its rifle of destination, the R93/R8.

It is not a Blaser proprietary caliber. It was developed by Günther Freres who also was responsible for the 5,6x50. Yes, it is a mountain caliber well suited for chamois etc. It has quite a large following in Austria. I used it succesfully on chamois and roedeer out of a 98 Mauser.

quote:

Originally posted by rj61:
Hi.

I would like to reload the 6x62 Frères with 95grn. Nosler Partition.
I have N160, N165, R905 and R907 powder here.

Who can help me with informations/maximum loads?

Thanks Roger

There´s one load in the DEVA reloading manual for the 95grs Partition and R905.

52,5grs R905
OAL: 78,5mm
primer: Fed 210M
Vo:~1000m/s


Martin