THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Re: Need 225 XLC load for .35 Whelen
 Login/Join
 
one of us
Picture of BigBullet
posted
WYO,

I use 61.5 grains of R-15 in my 35 Whelen with the XLC. I load these to an OAL of 3.350" in my 1903 Springfield rifle. The only thing I don't like about the bullets is the coating getting into my dies and scrapping off as I seat them. I wish I could get my hands on some uncoated ones again.

BigBullet
 
Posts: 1224 | Location: Lorraine, NY New York's little piece of frozen tundra | Registered: 05 July 2003Reply With Quote
one of us
posted Hide Post
Thanks for the info, BigBullet. I had forgotten to ask about the COL, and that was on my mind as well. I load XLCs in .308 and understand the issue with the coating gunking up the dies, but I liked them anyway, at least until the Triple Shocks came along.

As far as the non-coated bullets go, I surfed a litte bit, and Midsouth Shooters Supply's website indicates that they have them in stock. http://www.midsouthshooterssupply.com/item.asp?sku=0003535826 Hope this helps. WYO
 
Posts: 62 | Location: Wyoming | Registered: 16 June 2003Reply With Quote
one of us
posted Hide Post
Double Tap, Sorry.
 
Posts: 62 | Location: Wyoming | Registered: 16 June 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia