The Accurate Reloading Forums
WW296 vs. H110 Differences

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/17310175

26 February 2002, 09:27
Mule Skinner
WW296 vs. H110 Differences
I read in an article that there is no difference between Winchester 296 and Hodgden H110. It also stated that Winchester manufacturers the H110 for Hodgden. I really like to use 296, however there is not alot of reloading data for it and the 45 colt. Can I substitute the H110 load data for 296?

Also, has anyone used Hodgden Little Gun with any success?

26 February 2002, 09:44
R-WEST
Shark Bait -
To the first part of your question, H110 and W296 are both made by Primex, a subsidiary of Olin Corp.; the powders are essentially the same. I've used the data interchangeably in the 45 LC and 357 Mag. with no problems. The 45 turns into a pretty potent piece when you're using some of the heavier loads. Get a good grip.

Haven't gotten around to Lil Gun, yet, but Hodgdon has some load data for it in the 45 LC, at http://www.hodgdon.com/data/frame.htm

R-WEST

26 February 2002, 20:04
<PaulS>
Sharkbait and Rwest,
I have listened to this debate time and again. I got tired of taking someone elses word for the answers so I asked at the Hodgdon website. here is the reply followed by my question:

Yes and Yes. The difference in the data, is simply different labs, components and other variables.
Thanks,
Phil Hodgdon
-----Original Message-----
From: Paul Stephens [maimailto:Paulstephens2@attbi.com]
Sent: Friday, February 08, 2002 8:57 PM
To: help@hodgdon.com
Subject: Powder discussion
Dear sirs,
I have seen a discussion on one of the sites that I frequent where someone said that he was told by Hodgdon that H110 and Winchester 296 were the same powders. I take issue with this because of the loading data that I have. If the two powders are 'identical' (his wording) then why are the loads so different?
I am asking the same question - Are 296 and H110 identical powders? Is the data interchangeable?

Paul Stephens


Note that the person replied was Phil Hodgdon and that he not only states the powders are identical but that the data is interchangable.

PaulS

------------------
stay safe and live long!

26 February 2002, 20:23
<ultramag>
H110 and W-296 are the same powder.

------------------
May your chambers be true to your bores.