One of Us
| Work up from 65 grains IMR 4831. My 721 with 220-grain Hornadys gets 2700 fps with that load. 200-grain SPEERs and 70 grains H4831SC was too hot. Same load with 180-grain Woodleighs and TSXs gets 2800 fps without getting "sticky". A long bullet like the A-Frame and Barnes data works well enough for me, and I am goosey about staying within safe limits. AC is right (again).
_______________________
|
| Posts: 4899 | Location: Bryan, Texas | Registered: 12 January 2005 |
IP
|
|
One of Us
| AC.... did not ask for your load information nor anyone else's. re read my post "said from the Swift reloading manual".
BNagel....thanks. |
| Posts: 1019 | Location: foothills of the Brooks Range | Registered: 01 April 2005 |
IP
|
|
One of Us
| grizz... I just checked my Swift loading manual and it doesn't list the 300H&H...sorry |
| Posts: 892 | Location: Central North Carolina | Registered: 04 October 2007 |
IP
|
|
One of Us
| Ed S.....what is it for the .300WSM? |
| Posts: 1019 | Location: foothills of the Brooks Range | Registered: 01 April 2005 |
IP
|
|
One of Us
| quote: Originally posted by grizz007: Ed S.....what is it for the .300WSM?
grizz007, the load given for the 300 wsm will work for a 300 hh ....???? if so rl 19 62.8 grains 2635 fps max 67.5 grains 2855fps imr 4831 62.8 grains 2637 fps max 67.5 grains 2846 fps imr 4350 57.7 grains 2549 fps max 62.0 grains 2758 fps again those datas are for 300 wsm not for 300hh. |
| Posts: 1941 | Location: Whitehorse, Yukon, Canada. | Registered: 21 May 2006 |
IP
|
|
one of us
| http://www.hodgdonreloading.com/Hodgdon lists there own powders and since they are the distributors of IMR & Winchester powders, they list those too.
Mark Pursell
|
| Posts: 545 | Location: Liberty, MO | Registered: 21 January 2003 |
IP
|
|
One of Us
| 700xcr.....good to note. thankyou. |
| Posts: 1019 | Location: foothills of the Brooks Range | Registered: 01 April 2005 |
IP
|
|
one of us
| I stopped at 63.0 H4350 w/200 A Frame in my pre 64 300H&H. FYI my H manual list 64 gr max with 220-225 gr bullet.It is an old manual so work up as usual in this PC environment we live! Did seat it out to 3.55 or 0.02 off lands in this rifle. |
| |
One of Us
| I chose RL22@67grns......3.540", 215 Fed GM, Chrono'd at 2812 fps average. seems I tend to always go with RL22...thanks again. |
| Posts: 1019 | Location: foothills of the Brooks Range | Registered: 01 April 2005 |
IP
|
|
One of Us
| You should give Swift a call and ask them. They are supposed to be coming out with the new reloading manual at the end of the month or beginning of June. They have shot around 40 new cartridges. |
| Posts: 743 | Location: Las Vegas | Registered: 23 June 2009 |
IP
|
|