Anybody have a good load for a 7mm Rem. Mag with 154 grain Interbonds and/or 150 partitions? I tried the search function, but it seems to be down right now.


Your help is appreciated.

Look at Steve's pages or go to Alliant's site and look in the data section.

R22 has been the most accurate powder out of my 7 RM.

Try 66-68 grains w/ those pills. I would start in the 65.5-66 range.

Good Luck!

Reloader

Try either (the Interbond is cheaper and should work as well or better than the Partition) over 69 grains of IMR7828 MAXIMUM, Remington brass, Federal 215 primer, 3.3" COAL, 3000 fps. Reduce MAXIMUM by 10% for a starting load and work up carefully toward MAXIMUM watching for signs of excessive pressure or velocity.

Try this

http://www.loadyourown.com/loaddata/

Try Swift Sirroccos better design than inter bonds or partitions.
Rustystud

Exactly Rick. I'll try and snap a photo this Christmas weekend of a 150gr 7mm Scirocco shot from a 280 Remington that went through the shoulder of moose but failed to penetrate the rib cage. I'll bet the ranch, that a partition would have faired much better.

Chuck