Hate to sound stupid, but I have always used dippers and trickler and now I bought a dispenser. My question is when charging into the scale pan, how do you keep from getting powder all over? I bought it to speed up things, but I get powder all over everytime I throw a charge. Thanks.

DOES ANYONE KNOW WHAT HE'S TALKING ABOUT? I'VE USED 2 DIFFERENT KINDS OF POWDER MEASURES ANR NEVER HAD ANY PROBLEM GETTING THE POWDER INSIDE THE CASE. THE POWDER MEASURE I'M USEING NOW IS A LEE PERFECT POWDER MEASURE. IT WORKS GREAT AND IT'S PRICED RIGHT.
IT'S NOT AT ALL STUPID TO ASK QUESTIONS AT THIS FORUM. LOTS OF GREAT GUYS HERE TO HELP YOU FIND SOLUTIONS. LIKE THE MAN SAID "THIS PLACE ROCKS".

THE SECOND AMENDMENT PROTECTS US ALL............

If I'm understanding your problem correctly maybe you could make a drop tube out of some clear plastic tubing. Attach one end to the bottom of your dispenser and cut a piece long enough so that you can place the pan against the bottom of the tube without interfering with the lever of the dispenser, then throw the powder charge. Should "trap" the powder in the tube then gently lower the pan and weigh the charge.

I am talking about dropping the charge into the scale pan. I weigh each charge, it would be alright if I were just going into the case, but those little scale pans are shallow and powder flies out. Sorry if I was unclear. I used to use the dippers to get close and add a little to get there, but it is alot more time consuming. I'll try that Hold'm, thanks. Sorry tasco, didn't mean to get you all confused, so you can relax now.

[ 03-16-2003, 22:51: Message edited by: hunting1 ]

I hold the pan up against the drop tube, throw the charge and wait for the powder to hit the pan, and slowly drop the pan away from the drop tube.

You could try a 35mm film case and pour it from that gently into the scale pan.

Only an idea

Thanks to all, I will try the hold the pan up to the drop tube.

HEHEH I'M ALWAYS RELAXED. CONFUSED SOMETIMES BUT THAT NEVER EXCITES ME MUCH. WHY DO YOU WEIGH EACH CHARGE? I'VE CHONOGRAPHED ME HANDLOADS AND THEY HAVE ALWAYS BEEN BETTER THAN FACTORY LOADS AS FAR AS STANDARD DIVIATION. I GIVE THE PATIENT GUY WHO TAUGHT ME HOW TO RELOAD CREDIT FOR THAT.


THE 2ND AMENDMENT PROTECTS US ALL...........

Hunting 1,

Hold the pan flush up against the bottom of the opening and drop your charge. then slwly pull it away.

I do not think that there is an advantage to use a powder measure instead of a dipper when you weigh every charge anyway (where I ask like TASCO: is it worth it ?).

It is a good practice to weigh-check any thenth thrown charge though. And here I use a cartridge case as a shuttle between powder measure and scale.

Charge the case. Then dump the powder from the case into the pan slowly. Do not try to dump directly into pan.

Martindog

NAW I JUST LIKE CAPS

HUNTING 1 IF STATIC IS PART OF YOUR PROBLEM YOU COULD ALSO WIPE YOUR SCALE PAN WITH A BOUNCE DRIER SHEET TOO.

THE 2ND AMENDMENT PROTECTS US ALL..........