THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Which Case Trimmer for 308 Win to 470 Nitro?
 Login/Join
 
One of Us
posted
I am looking to buy a case trimmer that can trim cases from 308 Win up to 470 Nitro. I normally buy RCBS products so was looking at their case trimmers first. Can the RCBS High Capacity Case Trimmer trim small cases such as 308 Win or will I need to buy a second case trimmer for smaller cases? The RCBS Trim Pro 2- Manual Case Trimmer can only trim cases up to 338 Lapua in size. Any help will be appreciated. Thanks.
 
Posts: 71 | Registered: 11 May 2014Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Contact these folksLittle Crow
They don't show a 4700, but certainly they should be able to make you one. This trimmer is awesome, fast, consistent!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
One of Us
posted Hide Post
The Hornady is what I use for 470NE.


.
 
Posts: 42449 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
one of us
Picture of Andre Mertens
posted Hide Post
For decades I've used Lyman's Universal Trimmer (with power adaptor added in the meantime) but it is gatering dust since I discovered the little Lee trimmers. One per caliber, cheap, nothing to adjust, fast when used with an electric screwdriver.


André
DRSS
---------

3 shots do not make a group, they show a point of aim or impact.
5 shots are a group.
 
Posts: 2420 | Location: Belgium | Registered: 25 August 2001Reply With Quote
One of Us
posted Hide Post
Thanks for your comments. I did some research into the little crow products. Very impressive.
 
Posts: 71 | Registered: 11 May 2014Reply With Quote
One of Us
Picture of ledvm
posted Hide Post
It is hard to beat the Lee Trimmers IMHO.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
J. Lane Easter, DVM

A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House

No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991.
 
Posts: 38267 | Location: Gainesville, TX | Registered: 24 December 2006Reply With Quote
one of us
posted Hide Post
Forrester, you can get small med. and large beds. They all using the same components.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42209 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
While I have a high volume trimmer from Giraud Tool , my Wilson -Sinclair micrometer trimmer has handled all my trimming before. It is a high quality cutter you wont have to buy but once. It does require individual case holders so you would have to check on the Nitro - but assuming it will do it, you will be set.
 
Posts: 1440 | Location: Houston, Texas USA | Registered: 16 January 2005Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
I already have 450/400 3 inch and 404 Jeffery from Little Crow. Very nice people to deal with. The two cutters above were not listed, but they made them at my request!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia