THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
swift reloading manual
 Login/Join
 
one of us
posted
anyone out there have data for 375 H&H, Reloader 15 powder, and 270 gr A Frame?


Buddy Roberts
 
Posts: 183 | Location: Bedford, Texas | Registered: 19 July 2002Reply With Quote
One of Us
posted Hide Post
Remington case, Remington 9 1/2 M primer, Wiseman test barrel, 26" barrel length, 1-12" barrel twist.

Starting Load - 66.5 gr. RL-15 2546 fps

Maximum Load - 71.5 gr. RL-15 2721 fps

Data is from Swift's manual published in March of 2003 for the 375 H&H with a 270 gr. A-Frame bullet.
 
Posts: 212 | Location: Longmont, CO | Registered: 30 July 2005Reply With Quote
one of us
posted Hide Post
thank you sir!


Buddy Roberts
 
Posts: 183 | Location: Bedford, Texas | Registered: 19 July 2002Reply With Quote
One of Us
posted Hide Post
Just some info on the Swift Reloading book.

I discussed the Swift Reloading manual in detail with Bill Hobert, President of Swift Bullet Company. At the Shot Show in 2003.
Much of the book and its loads are developed of computer software and not tested loads. They just give suggested starting and stoping load ranges.

LongShot
 
Posts: 322 | Location: Youngsville, NC | Registered: 23 April 2004Reply With Quote
One of Us
posted Hide Post
Don't go more than 73.5 grs.or you could have problems.Good Luck
 
Posts: 1371 | Location: Plains,TEXAS | Registered: 14 January 2008Reply With Quote
One of Us
posted Hide Post
Their 300 grain A Frame load using IMR 4350 at max load really performs well in my rifle. I get 2550 out of it, so it's close to book.
 
Posts: 11729 | Location: Florida | Registered: 25 October 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia