THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Re: Load suggestions for 30-06
 Login/Join
 
one of us
Picture of South40
posted
It took a lot of work for me to get my M-70 '06 to shoot well. Best load turned out to be 60 grains of H4831SC with 180 grain Remington Core Locks (of all things), Federal Match cases and 210M primers. S40
 
Posts: 442 | Location: Way out west | Registered: 28 March 2001Reply With Quote
one of us
posted Hide Post
When the groups are from two to five inches with various loads the cause is usually the rifle, scope, shooter or all three. Many very accurate rifles will shoot almost any load well.



In the 30-06 IMR 4350 and Sierra bullets are pretty much an accuracy standard. Many Hornady Interloks shoot just fine as well.



I say it's not the ammo.
 
Posts: 5543 | Registered: 09 December 2002Reply With Quote
one of us
posted Hide Post
So far, I've gotten the best accuracy from 180Grn Sierra Game Kings on top of IMR-4831 with 57.2-57.4 grns of powder working best. 165Grn Partitions and 180Grn Ballistic Tips shoot about MOA, again using IMR-4831. Rifle is a BAR w/22" barrel, NO BOSS.

These were shot at 100Yds. The dark squares are 1/2", light squares are 1/4". The group on the left is a 3 shot group. The two on the right are 4 shot groups.


firstshot
 
Posts: 26 | Location: North West Arkansas | Registered: 01 April 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia