A short time ago I bought some of these bullets that a fellow AR brother could not stabalize and pulled. They were a little indented from pulling. These are yesterday's results.

47.3gr 4831 short cut, RP ni case, #34 primer, oal= 2.780" 3131 to 3202fps. small amount of soot, mild, 3 shot 1/2" group at 50 yds. 8 shot 3/4" group at 200 yds.

Just for comparison.

Everythihing the same except a 68gr. Berger fb and oal= 2.720"3118 to 3224 fps., 4 shot 1/2" group at 50 yds. multi shot 2" group at 200 yds.

100gr. SPFB. Mid South Bulk. FC cases, #34 primers, 42.4gr. H-4831( not short cut) oal=2.858" 2583 to 2652 fps. 4 shot 1/2" group at 50yds and a small group at 200 yds.

roger

quote:

They were a little indented from pulling.

So that "pulling damage" didn't destroy accuracy?

Who'd a thunk it?

quote:

Originally posted by bartsche:
A short time ago I bought some of these bullets that a fellow AR brother could not stabalize and pulled. ...., 3 shot 1/2" group at 50 yds. 8 shot 3/4" group at 200 yds.

And you expect people to believe that. Wooooops, are you trying to get more Pulled Bullets or what???

quote:

...68gr. Berger fb and oal= 2.720"3118 to 3224 fps., 4 shot 1/2" group at 50 yds. multi shot 2" group at 200 yds. ...

And the Bergers shot worse than the Pulled Grenades. Did you load the Barnes with the "Points" forward???
-----

Naw man, great shooting, nice report!

Raining and dreary here. Saw a Robin catch a worm in the yard. Too early for the Robins. May have Robin Popsicles in a week or so - if you need any.

quote:

Originally posted by vapodog:

quote:

They were a little indented from pulling.

So that "pulling damage" didn't destroy accuracy?

Who'd a thunk it?

Surprised me! roger