The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Sabot slugsGo | New | Find | Notify | Tools | Reply | |
| Sabot slugs | Login/Join |
| one of us |
Does anybody know if components and roll crimping equipment are available for loading sabot slugs? My Savage 220 is more expensive to shoot than my 375! Greg... | ||
|
One of Us |
http://www.ballisticproducts.com/ Gulf of Tonkin Yacht Club NRA Endowment Member President NM MILSURPS | |||
|
| one of us |
Well set up for 12 ga., but no 20 ga. sabots! Good call on the roll crimping tools though. Thanks! Greg... | |||
|
Moderator |
Both Lyman and Lee make (or made in the case of Lee IIRC) 20 gauge slug moulds that are designed to use a standard shot cup for the sabot. I have the 12 gauge version of the Lee and was not totally happy with it, so if I had to do it over I'd get the Lyman mould but I suspect you could find a used Lee mould on ebay or gunbroker. for every hour in front of the computer you should have 3 hours outside | |||
|
one of us |
| |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia