The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading 375 win to 7/30 watersGo | New | Find | Notify | Tools | Reply | |
| 375 win to 7/30 waters | Login/Join |
| one of us |
want to size 375 win brass to 7/30 waters.tried just one 375 to 30/30 than to7/30 split the neck going to 30/30. so tried one 375 right to 7/30.looked good .dont know why the first one split. looks like i will lose some but thats ok. the QUESTION? IF GO THIS ROUTE will i have to inside neck ream this brass after i neck to 7/30.anyone help me out here give me a little good advice ok. dont want to have to buy a reamer thanks. ken s ken schweitzer | ||
|
one of us |
I know this is robably an obviuse question, but why not just sell the .375win brass & buy 30-30 or 7-30 brass? I would take some off your hands.  LIFE IS NOT A SPECTATOR'S SPORT! | |||
|
| One of Us |
That will depend on your chamber. The neck wall thickness will definitely be thicker than 30/30 brass. For starters, make a dummy round with the 375 brass and see if it chambers. | |||
|
| one of us |
because 375 brass is stronger than 30/30 brass an 7/30 is hard to get. thanks festus
ken schweitzer | |||
|
one of us |
You might anneal the 375 cases. The first case was probably a little hard. Frank "I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money." - Robert Ruark, Horn of the Hunter, 1953 NRA Life, SAF Life, CRPA Life, DRSS lite | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia