One of Us
| I would recommend Norma MRP powder. I have found it to be very consistent and accurate. I could not find another powder that gave higher velocity.I believe it is what NORMA/WEATHERBY use in their .340 Weatherby factory loads. |
| Posts: 842 | Location: Western USA | Registered: 08 September 2018 |
IP
|
|
One of Us
| i have to dig in my logbook but i have great sucess with a powder i think h4831 sc and 225 grains. |
| Posts: 1887 | Location: Whitehorse, Yukon, Canada. | Registered: 21 May 2006 |
IP
|
|
One of Us
| Thank you both. I will look into each. Optik1 |
| Posts: 375 | Location: linwood Michigan | Registered: 07 February 2008 |
IP
|
|
one of us
| Reloader 22. I’ve always been able to duplicate Weatherby factory specs with it. i.e. the 250 gr Partition at ~2,950 fps and I get good brass life with the load I use.
Reloader 23 is also worth a look. |
| Posts: 1244 | Location: Golden, CO | Registered: 05 April 2001 |
IP
|
|
One of Us
| hello back to you.
it was not the sc but the plain jane h4831 and 80-82 grains ...worked great with core lokt ultra, swift a frame and 230 grains fail safe.
col for the cl 225 grains was is 3.694 and i used 375hh federal cases.
primer were the 215 federal.
what is working and being safe in my rifle may not in yours.
that load worked great on bison and very accurate. |
| Posts: 1887 | Location: Whitehorse, Yukon, Canada. | Registered: 21 May 2006 |
IP
|
|
One of Us
| Thank you all. Optik1 |
| Posts: 375 | Location: linwood Michigan | Registered: 07 February 2008 |
IP
|
|
one of us
| I have shot the .340 Wby since 1997 when I was preparing for a Alaska Yukon Moose Hunt in the Farewell Burn of Alaska. My go to load is 87 grains of RL-19 and Fed 215M primer behind a 240 grain Northfork bullet. It crony’s at 2919 fps and does a fantastic job when it get there. A 250 grain Nosler Partition with same powder and primer is a fraction slower and just as good and got me my Moose. Good Shooting.
phurley
|
| |
one of us
| I need to make a correction, I stated the speed of the .340 Wby 240 gr. Northfork load was 2919 fps. The speed was actually 3017 fps for that load after I checked my tables and targets instead of going from memory. The 250 gr Nosler Partition was some less. Good Shooting.
phurley
|
| |
One of Us
| Thanks phurley! |
| Posts: 375 | Location: linwood Michigan | Registered: 07 February 2008 |
IP
|
|
One of Us
| Back in '98 I used 82gr H4350 behind the older Barnes 210 xbt. It was humming, close to 3200! |
| Posts: 256 | Location: Sandy, Utah | Registered: 30 May 2016 |
IP
|
|
One of Us
| Thanks. |
| Posts: 375 | Location: linwood Michigan | Registered: 07 February 2008 |
IP
|
|
one of us
| Its been many years since I sold my 340 but I got awesome results with 7828, highest velocity and recoil also btw..I only used 210 and 250 Nosler partitions..I went back to the .338 Win after that..
Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120
rayatkinsonhunting@gmail.com
|
| Posts: 42210 | Location: Twin Falls, Idaho | Registered: 04 June 2000 |
IP
|
|
One of Us
| Thanks Ray. Always enjoy your posts! |
| Posts: 375 | Location: linwood Michigan | Registered: 07 February 2008 |
IP
|
|