THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
powder selection for 44mag
 Login/Join
 
<broadsword>
posted
I'm trying to develope a load for 4" ruger redhawk 44 mag. The goals are very clean, low recoil, approx. 1200 fps, and a powder that will also work with ligher loads. At this point I've been playing around with 240xtp, wlp primers, and AA5. I finally settled on 12.7 grs (still has quite a bite), this just exceeds 1000fps, but it is very clean and accuracy is pretty good as well. But I really want to get the velocity a little faster and the recoil less (which isn't going to happen with aa5), any suggestions? I've been suggested bluedot (not sure how clean this one will be) and universal. Also any thoughts on Herco?
 
Reply With Quote
one of us
posted Hide Post
I would try around 11 grs of herco with a 200 gr bullet Iam shooting 13 grs and getting 1335 12 grs gave me 1250.
 
Posts: 19835 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
Picture of 243winxb
posted Hide Post
IMR 4227 is a good powder for the 240 gr. bullets in the 44 mag.Use a mag. primer, will help keep it clean.
 
Posts: 1295 | Location: USA | Registered: 21 May 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia