The Accurate Reloading Forums
300H&H

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/141103154

23 March 2006, 04:32
ace
300H&H
MOD 70 WIN ANY FAVORITE LOADS OR RELOADING TIPS WOULD BE HELPFULL


Ya can't kill'em too dead. -Elmer Keith
23 March 2006, 05:09
vapodog
My 300 H&H likes both ends of the spectrum.....125 ballistic tips and 200 grain A-Frames.....take your pick and go shooting.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
23 March 2006, 18:53
Oneshot_onekill
I load 165 grain sierra boatails for really big game like crats...lol When you shoot you dispose of the evidence... I also have some 220 grainers for them there really big tom crats.

On the serious note the 165 grainers work well. I load them in front of 77.4 grains Hogdon 4831. This load works very well in an old 721 Remington.


Make every shot Count!!!
23 March 2006, 20:41
buckshot
Since Hodgdon has given the old IMR line the short cut treatment, I decided to experiment with 7828 in the 300 H&H. FWIW...
-IMR 7828 SSC 71.5 gr
-Nosler Accubond 200 gr
-Fed F215
-Vel 3091FPS
23 March 2006, 21:32
Savage99
Check inside each fired case for insipiant head separations.


Join the NRA