The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Primer for IMR4350 RE22Go | New | Find | Notify | Tools | Reply | |
| Primer for IMR4350 RE22 | Login/Join |
| One of Us |
I'm about to start a new load for me 30.06.Winchester brass, 180grn core-lokt, the powders pre mentioned.I have on hand rem 9 1/2 primers which I have used up untill now with no problemo's but just read on another site "GunnersDen" to be precise that the rem. primer is considered a bit marginal for slower powders and that CCI200, Fed215 would give better shot to shot ignition being higher pressuer primers.Under the specific info for the 06 it is sugested that 4350/Rem 9 1/2 primer is regarded as a reliable accuracy combo.Can anyone shine light on this? | ||
|
one of us |
I don't load for a 06 but plenty of 280 based wildcats. I've never had an issue or problem using Rem 9 1/2 with RL 22 or 4350 As usual just my $.02 Paul K | |||
|
One of Us |
I don't use mag primers, even in mag cartridges... Large rifle of any type have always more than done the job for me... regardless of load... even igniting 83 grains of H 1000 in a 300 Win Mag, very reliably and accurately... Life Member: The American Vast Right Wing Conspiracy Jan 20, 2009.. Prisoner in Dumocrat 'Occupied America', Partisan in the 'Save America' Underground Beavis..... James Beavis..... Of Her Majesty's Secret Service..... Spell Check Division "Posterity — you will never know how much it has cost my generation to preserve your freedom. I hope you will make good use of it." John Quincy Adams A reporter did a human-interest piece on the Texas Rangers. The reporter recognized the Colt Model 1911 the Ranger was carrying and asked him "Why do you carry a 45?" The Ranger responded, "Because they don't make a 46." Duhboy....Nuttier than Squirrel Poop... | |||
|
| One of Us |
Sean you are an idiot, and desperate for friends, and yes rem primers are a bit soft, but ask yer self? why are loads at 1.5 grns under max in 06 and 257bob so dam through the same hole.Come back spitfire! | |||
|
One of Us |
I shoot 180 grain Barnes TTSXs using IMR 4831 and simply use Fed 210 primers. Works everytime. Ken.... "The trouble with our liberal friends is not that they are ignorant, but that they know so much that isn't so. " - Ronald Reagan | |||
|
One of Us |
IMO you can use any primer you want in the .30-06....even magnum primers if you choose. I've read that magnum primers are for more than 70 grains of powder and others say to use them with ball powders..... It's the internet.....everyone has a voice.... In my experience they all (primers) have worked well....use what trips your trigger. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| One of Us |
The original manufacturers of 4350, IMR uses Rem 9 1/2 primers in nearly all their their 30-06 data. | |||
|
| One of Us |
Thank you everybody.That sets my mind at rest.I shall continue on. | |||
|
| one of us |
seafire2, i see where you dont use mag primers at all,.. i have alot of WLR primers.I have shot this primer for along time in 270s, 280s, and so on...but never with BALL POWDER.. will this primer be ok in my 7MM-08 with W-760??.. Or has someone done this.. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia