Hi,
Newbie here!
Have been re-loading for about two years now.
primarily to the cost of shooting my 500.
I also load .44mags.
I recently purchased some brand-new "500" grain 50cal JFP from Hornady.
I can't find "any" data to load these bullets.
Hornady won't answer my e-mails?
They are busy, I guess.
Anyone out there have anything to offer?
Would greatly appreciate any help!

Good news !
I finally got thru to Hornady.
Recieved data for the 500 gr. 50cal.

500 S&W mag. 500gr.JFP
primer-WLP C.O.L.-2.040
sect. density-.280 ballistic coefficient-.185

powder velocity
1000 1100 1200 1300 1350
lil' gun 17.6 21.3 25.0 28.7
win 296 24.9 27.4 29.9 32,4
H110 23.8 26.7 29.6 32.5
IMR 4227 24.0 27.1 30.2 33.3
VIHT N120 29.2 32.0 34.7 37.5
AA 1680 29.9 32.8 35.8 38.7 40.2

I was having a rough time trying to copy and paste this.
That's why I just jotted it all down.

Notice of disclaimer: This data was developed in the Hornady Mfg. Co. Test facilities under controlled conditions may vary.
The reloader should approach maximum loads with extreme caution.

Sorry folks!
The newbie has struck again !
The data did "not" come out the way I wanted it to.
Anyone wanting the attachment as I recieved it(pdf)
please let me know, and I will forward it to you.
(is that against the site's rules?)

Bullhead, I would like to know how those loads preform. If you do not mind could you email me that data. The bigger the bullet the more I like to shoot it. My email address is ccsykes@ncsu.edu. Also which 500 do you have? Do you have a problem with some of the spent cases sticking to the cylinder after you shoot cast bullets. I find that the only time the cases stick is if I use cast bullets. If I use the jacketed bullets, they do not stick? If anyone has any clue to why this happens, Please let me know.