Hi guys. I have just started playing around with a set of x dies in .308. When sized in the regular fl sizing die I have no problems chambering them in my M1A and 700. When I size them in the x die there is a little more resistance chambering them. It not as bad as trying to chamber a fired case just in between the two. Have any of you guys had problems. Am I being to picky.

You want just a slight bit of snugness when you chamber a sized round. But, if you are getting any more than a slight bit, you may adjust the sizing die to improve the chambering.

Geronimo

The die is adjusted to cam over as the directions say to

note that the x die may create a smalldonut at the base of the neck