THE ACCURATERELOADING.COM TROPHY ROOM FORUM


Moderators: Saeed
Go
New
Find
Notify
Tools
Reply
  
Remodeling and need measurements
 Login/Join
 
One of Us
posted
I'm remodeling my trophy room and I need some rough measurements.
Can someone tell me the average distance from the wall to tip of nose for these shoulder mounts:
Gemsbuck
Kudu
Eland
This will help me position my new track lighting.
Thank you
 
Posts: 284 | Location: Hayden, Colorado | Registered: 06 March 2004Reply With Quote
one of us
Picture of Outdoor Writer
posted Hide Post
I can't help on the eland, but my gemsbok's nose is 33" from the wall and the kudu's is 35" away. Obviously, the exact distance will depend on the head position as well as the form your taxidermist uses. Some will have more shoulder area. You can see what my mounts look like in this thread -TONY


Tony Mandile - Author "How To Hunt Coues Deer"
 
Posts: 3269 | Location: Glendale, AZ | Registered: 28 July 2003Reply With Quote
One of Us
posted Hide Post
Eland, wall to tip of nose is 37 inches, Kudu 38 inches.
 
Posts: 1994 | Registered: 16 January 2007Reply With Quote
One of Us
Picture of Cunningham
posted Hide Post
Eland - 47"

Gemsbok - 26"


Global Sportsmen Outfitters, LLC
Bob Cunningham
404-802-2500




 
Posts: 580 | Location: I am neither for you or against you. I am completely the opposite. | Registered: 23 December 2004Reply With Quote
One of Us
posted Hide Post
Eland 34" (This is a shortened shoulder mount.)

Kudu 34-35" (It is mounted high in stair well)

Gemsbok 26"

All animals are essentially in the same position, straight off the wall. Kudude
 
Posts: 1473 | Location: Tallahassee, Florida | Registered: 04 January 2005Reply With Quote
One of Us
Picture of madabula
posted Hide Post
Assuming you are wanting the distance the nose extends into the room from the wall and not the distance from the tip of nose to the tip of horn it will vary according to the pose, size of the animal and amount of shoulder included in the mount. (some older forms are shorter than many newer styles, also some are straight and some are offset.)

If you think of the 2 axis' being the shoulder to the base of the skull (neck) and the other being the skull to the nose these 2 seperate variables will change the measurements. Another way to illustrate this is to bend your arm at the elbo and watch how the wrist gets closer and further from the shoulder. Now holding that jounts still withyour fingers extended bend the wrist and note that the tips of the fingers get closer and further to the arm and also to the shoulder.

In taxiderrmy terms the poses are typically called upright , semi upright, semi sneak and full sneak. This is the angle of the neck from high to low. The head then can also be cocked up or down to face the animal into the room according to the viewing height and to accomodate long swept back horns not hitting the wall or ceiling.

So.... to give you an accurate average you would need to discribe the type of mount pose you are thinking of.

Mike
 
Posts: 290 | Location: louisville ky | Registered: 11 May 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia