30 December 2007, 02:16
z1r.368" lube & size die
Where can a fella find one of these? Got the urge to try some cast boolits in my 9.3x57.
30 December 2007, 05:55
ireload2 Stillwell at sizingdie.com
30 December 2007, 10:30
Idaho SharpshooterI'm shooting some NEI 275 and 305 +/- cast in my X62, about 2" at 100 and 3" at 200. I haven't tinkered much yet, the big boomers are taking all my time. I hope to get consistent 1.25" at 100 with it next spring.
Rich
DRSS
Knowledge not shared is knowledge lost...
31 December 2007, 07:41
mstarling+1 on Stillwell. Only place I know they can be had.
03 January 2008, 11:43
LoydMr Stillwell is retired as of 01/01/08. You could probably drill or ream then polish a die that was smaller. I think there is a guy on Cast Bullets forum that does that. If you have a machine shop in your town they could do it or a friend with a lathe.
03 January 2008, 12:22
z1rquote:
Originally posted by Loyd:
Mr Stillwell is retired as of 01/01/08. You could probably drill or ream then polish a die that was smaller. I think there is a guy on Cast Bullets forum that does that. If you have a machine shop in your town they could do it or a friend with a lathe.
Man, talk about snoozing and loosing!
Looks like I'll have to make one. I'd rather spend my time making guns or shooting than making dies.
