THE ACCURATERELOADING.COM CAST BULLET FORUM


Moderators: Paul H

Closed Topic Closed
Go
New
Find
Notify
Tools
The Larry Gibson Cast Bullet Bullshit Thread
 Login/Join
 
One of Us
posted
Now you dummy the reason I moved the jug thread is because that no good Robert Banks locked the thread.

The biggest lie of the century is that you got the same results as me bwhahahahaha. What a freaking joke, almost big as joke as you are to the human race.

I'd say Gear has more balls then you.

Hurts you not to be center of attention doesn't it asshole? You are center of attention when the topic is assholes. Notice I eliminated twenty some pages of your, swheeler, and Pat I's bullshit.
Your three friends got banned because they followed your advice to troll and personal attack people. Some friend you are to them, but hey they are equally as stupid as you and didn't realize how you screwed them over to meet your own means. Same reason no dog you ever owned liked you.

Hey larry, you're Merda!
 
Posts: 2459 | Registered: 02 July 2010
One of Us
posted Hide Post
you're working your way to being banned from another site, genius.

Get on with your life...
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005
One of Us
posted Hide Post
I have no idea who you are or why you started this thread, but why don't you go crawl back under the rock you crawled out from beneath? I have no time for this sort of stuff. This is a fine site, and I hope to hell you figure out you don't belong here. Because you don't. Get lost!
 
Posts: 4748 | Location: TX | Registered: 01 April 2005
One of Us
posted Hide Post
Gentlemen, the reason for the thread/post was for larry to do all his arguing in this thread rather then ruin the other technical threads because, believe it or not, some people are trying to learn something.

If one considers themselves not a neophyte to cast bullets or shooting and says larry knows what he is talking about is very questionable. Like you said you don't know what my issue with him is and you only know one side of the story.
 
Posts: 2459 | Registered: 02 July 2010
one of us
posted Hide Post
quote:
Originally posted by nugman:
Read his posts on castboolits.com, then report back.


I have. You only have one side of the story. I can show you that larry isn't as good as you think he is from his own posts.
 
Posts: 271 | Registered: 24 December 2002
One of Us
posted Hide Post
Nobody here, the two of you excepted, really cares; one way or the other.

Regardless of the circumstances, it is rude behavior.
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005
One of Us
posted Hide Post
quote:
Originally posted by Idaho Sharpshooter:
Nobody here, the two of you excepted, really cares; one way or the other.

Regardless of the circumstances, it is rude behavior.


We act like larry it's rude behavior, but it's okay for him to carry on that way?
 
Posts: 2459 | Registered: 02 July 2010
One of Us
posted Hide Post
quote:
Read his posts on castboolits.com, then report back.


larry's knowledge boils down to 28 grains of 4895 and a tuff of Dacron.
 
Posts: 2459 | Registered: 02 July 2010
one of us
posted Hide Post
quote:
Originally posted by Idaho Sharpshooter:
Nobody here, the two of you excepted, really cares; one way or the other.
Your probably right about that, and thats part of the problems facing this country now. Nobody gives a crap about anything but themselves.

Regardless of the circumstances, it is rude behavior.There is a lot of rude behavior everywhere, including quite a few areas of this site including it's forum moderators on certain forums.
 
Posts: 271 | Registered: 24 December 2002
One of Us
posted Hide Post
Catsmith, to get a stuck case out of your AR first make sure the magazine is out of the rifle. One way is to put a cleaning rod down the barrel and while pulling on the charging handle ( you have to pull on it to unlatch it or it would let the bolt/carrier group come back) tap on the case with the cleaning rod. Another method (I don't like this one but know many use it) slam your buttstock again the floor. I would put a towel on a wood block or even just the wood block. The inertia of the bolt/carrier group will extract the case. Now you see why I don't like that method. Imagine if you have a scope on the AR. That can't be good for it. There is another way but I'm not going to mention it, I will if you pm me.

If you were familiar with the AR you would know how far a sized case will go into the chamber without having to slam the bolt/carrier group on it. You need to screw you sizer die just a tad more. I'd black mark the neck and shoulder to make sure you're not pushing the shoulder too far back and creating head space. It it does and the case is still too tight then you may need a small base die. AR's will score one or two lines (more often two lines) on the necks and that area and it is from the sharp inside corners of the locking lugs on the barrel extension. They will always be oriented on the same are of the case because the rifle is a push feed with a plunger type ejector. The ejector is always pushing on the rim and trying to tilt the case to the right so the marks will always be on the 2-3 o'clock position of the case as looking at the breech from the rear.
 
Posts: 2459 | Registered: 02 July 2010
Administrator
Picture of DRG
posted Hide Post
quote:
Originally posted by SmokinJ:
quote:
Originally posted by Idaho Sharpshooter:
Nobody here, the two of you excepted, really cares; one way or the other.

Regardless of the circumstances, it is rude behavior.


We act like larry it's rude behavior, but it's okay for him to carry on that way?


Yes it's rude behavior.

And now you know why I didn't ban Larry.

Because it seems everyone does it.

Oh, and this thread is closed.

Don
 
Posts: 26549 | Location: Where the pilgrims landed | Registered: 08 January 1998
  Powered by Social Strata  

Closed Topic Closed


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia