I recently acquired a Lyman #313492 mould, which makes a wadcutter of about 93 grains. Can anyone recommend a small-game load for this bullet for a Ruger Single-Six in .32 H&R? Thanks for any help.

I use 2.1 gr of Bullseye with the Speer/Hornady HBWCs. Any more than that and the skirts blow destroying accuracy. You could probably go up to 3gr with the solid based cast WC and maintain good accuracy. My most used 32 H&R load (original run Single Six) is 3 gr Bullseye under the Lee TL314-90-SWC. Velocity is 1000 fps out of the 6" barrel. Accuracy is excellent.

Larry Gibson

I use 2.7 gr. of titegroup, 6.3 of HS-6 or 9.6 gr. of 2400. The last 2 ar pretty hot but are safe in my Ruger. Bernie