The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Cast Bullets Heavy 475 cast bulletsGo | New | Find | Notify | Tools | Reply | |
| Heavy 475 cast bullets | Login/Join |
| One of Us |
What are some of the heaviest hard cast for the .475 Linebaugh...??? Seems 440 gr. is the heaviest I have found. Wondering if there are heavier available. ALASKA is a "HARD COUNTRY for OLDMEN". (But if you live it wide'ass open, balls'to the wall, the pedal floored, full throttle, it is a delightful place, to finally just sit-back and savor those memories while sipping Tequila). | ||
|
| One of Us |
Any information..........???? ALASKA is a "HARD COUNTRY for OLDMEN". (But if you live it wide'ass open, balls'to the wall, the pedal floored, full throttle, it is a delightful place, to finally just sit-back and savor those memories while sipping Tequila). | |||
|
| One of Us |
Still.....no information available. ALASKA is a "HARD COUNTRY for OLDMEN". (But if you live it wide'ass open, balls'to the wall, the pedal floored, full throttle, it is a delightful place, to finally just sit-back and savor those memories while sipping Tequila). | |||
|
one of us |
As the Linebaugh shoots the same diameter bullet as a .470 Nitro Express, I am certain ACCURATE MOULDS can set you up. I have one of their 48-495 setups and it casts nicely with a .476 diameter. Here is a link: https://www.accuratemolds.com/...l.php?bullet=48-495N Merkel 140A- .470NE Beretta Vittoria- 12 Ga. J.P. Sauer & Sohn Type B- 9.3x64mm ArmaLite AR-10A4- 7.62x51mm Franchi Highlander- 12 Ga. Marlin 1894 CB Limited- .41 Magnum Remington 722- .244 Rem. and many, many more. An honest man learns to keep his horse saddled. | |||
|
| One of Us |
Thank You, I appreciate the help. ALASKA is a "HARD COUNTRY for OLDMEN". (But if you live it wide'ass open, balls'to the wall, the pedal floored, full throttle, it is a delightful place, to finally just sit-back and savor those memories while sipping Tequila). | |||
|
| One of Us |
I have some 560 gr flat point and some 540 gr with a very small flat point, came from Jason Joy in Cumberland, WV. Don"t know if still available, or if still in business. Here is contact info: jasonjoy577@yahoo.com 1-304-491-9538 Hope it helps... Karl Evans | |||
|
Moderator |
The bullet on the right is a 460 gr. It was a custom mold I had built by Ballisticast. I used it in my 480 and loaded it to 1100 fps.  __________________________________________________ The AR series of rounds, ridding the world of 7mm rem mags, one gun at a time. | |||
|
| new member |
You must have wrists of steel. I use a 395 gr mould made by accurate in my Linebaugh. She's all I can handle. I can say that the slug cast out of Wheel Weights and Water dropped will end up somewhere north of 3 counties over before she stops. Have literally punched straight through 3 hogs in a line with it. Never recovered a slug and I dont push max with the gun. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia