any suggested loads if you dont want to post them email me at lws43@hotmail.com. Is this the same as wc820 it sure looks like it.

As I remember the story; H108 was an off spec lot of powder sold by Hodgdon. Kinda like the fast batch of WC820 out on the market now. Ok to use, just not the same as others of the same number.

I have some data if you have a fax number, or someone has a number I can fax to and they can scan the data. If you are interested in one or two cartridges I can just type it in!

The load data is limited but was done by a lab!

LouisB

[ 08-29-2003, 06:00: Message edited by: TCLouis ]

I have had great results with it in 44 mag using both cast and jacketed bullets.

I did have it and H116 data scanned. If i cannot find it i can rescan it and email it to anyone that wants it.

Send me an email if you are interested....

Lloyd, I can't tell any difference among H108, AA9, and WC820, BUT I do not shoot max full out ball buster loads either (most of the time). A lot of the single shot folks use 108 with great results. GonHuntin is right about 108 in the 44 maggie - works purdy good. Also have used it in 30-06 and several other rifle loads. sundog

Here is the data compliments of Powder Valley ( http://www.powdervalleyinc.com/ )