THE ACCURATERELOADING.COM CAST BULLET FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Re: Fat 30 vs. Oversize 30
 Login/Join
 
trk
one of us
posted
Quote:

Tim:

My Cadet has groove diameter .3185. If you don't need a gas check design for higher velocity, look for an 8mm Nambu mold since they are in the weight & diameter range you need. I use a Hensley-Gibbs 116.323 or an NEI 322-100, which are both round nose with plain base. Sizer is either an RCBS .319 (actual is .3185) or a Lyman .321 (actual is .3200). The downside is the molds won't be at the Lee price unless one pops up at a gun show or eBay. Good luck.

Phil S.



Thanks, Phil.

That gives me a great place to start (being 5 groove I wasn't sure exactly how big the diameter was).
 
Posts: 621 | Location: Virginia mountains | Registered: 25 December 2002Reply With Quote
beagledog
one of us
posted Hide Post
Tim:

My Cadet has groove diameter .3185. If you don't need a gas check design for higher velocity, look for an 8mm Nambu mold since they are in the weight & diameter range you need. I use a Hensley-Gibbs 116.323 or an NEI 322-100, which are both round nose with plain base. Sizer is either an RCBS .319 (actual is .3185) or a Lyman .321 (actual is .3200). The downside is the molds won't be at the Lee price unless one pops up at a gun show or eBay. Good luck.

Phil S.
 
Posts: 28 | Location: Texas | Registered: 18 June 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia